EN 10025-5 Grade S355J0W normalized or normalized formed (+N)

View suppliers (8)
Want to keep this datasheet? Save it now in your required format

Description

The weather resistant steel S355J2WP with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding. The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated. Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge. With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible. The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueComment

Densidad

7.8 g/cm³

Show Material materials with Densidad of 7.8 g/cm³

Typical for Steel

Mecánica

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coeficiente de Poisson

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Steel

Elongación

17.4 %

Show Material materials with Elongación of 17.4 %

Predicted Value, A200

21.8 %

Show Material materials with Elongación of 21.8 %

Predicted Value, A5

23.1 %

Show Material materials with Elongación of 23.1 %

Predicted Value, A50

20 °C

14 %

Show Material materials with Elongación of 14 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

15 %

Show Material materials with Elongación of 15 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

16 %

Show Material materials with Elongación of 16 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

16 %

Show Material materials with Elongación of 16 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

17 %

Show Material materials with Elongación of 17 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

18 %

Show Material materials with Elongación of 18 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

18 %

Show Material materials with Elongación of 18 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

18 %

Show Material materials with Elongación of 18 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

19 %

Show Material materials with Elongación of 19 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

20 %

Show Material materials with Elongación of 20 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

20 %

Show Material materials with Elongación of 20 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire

20 °C

21 %

Show Material materials with Elongación of 21 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire

20 °C

22 %

Show Material materials with Elongación of 22 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire

Límite elástico

261 MPa

Show Material materials with Límite elástico of 261 MPa

Predicted Value, RP1

286.6 MPa

Show Material materials with Límite elástico of 286.6 MPa

Predicted Value, RP1 Transverse

390 MPa

Show Material materials with Límite elástico of 390 MPa

Predicted Value, RP02

401.5 MPa

Show Material materials with Límite elástico of 401.5 MPa

Predicted Value, RP05

406.7 MPa

Show Material materials with Límite elástico of 406.7 MPa

Predicted Value, RP02 Transverse

468.6 MPa

Show Material materials with Límite elástico of 468.6 MPa

Predicted Value, RP002

20 °C

295 MPa

Show Material materials with Límite elástico of 295 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

295 MPa

Show Material materials with Límite elástico of 295 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

315 MPa

Show Material materials with Límite elástico of 315 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

315 MPa

Show Material materials with Límite elástico of 315 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

325 MPa

Show Material materials with Límite elástico of 325 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

325 MPa

Show Material materials with Límite elástico of 325 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

335 MPa

Show Material materials with Límite elástico of 335 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

335 MPa

Show Material materials with Límite elástico of 335 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

345 MPa

Show Material materials with Límite elástico of 345 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

345 MPa

Show Material materials with Límite elástico of 345 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

355 MPa

Show Material materials with Límite elástico of 355 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

355 MPa

Show Material materials with Límite elástico of 355 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Módulo elástico

190 - 210 GPa

Show Material materials with Módulo elástico of 190 - 210 GPa

Typical for Steel

Resistencia a la tracción

20 °C

450 - 680 MPa

Show Material materials with Resistencia a la tracción of 450 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

450 - 630 MPa

Show Material materials with Resistencia a la tracción of 450 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

450 - 600 MPa

Show Material materials with Resistencia a la tracción of 450 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

450 - 680 MPa

Show Material materials with Resistencia a la tracción of 450 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

450 - 630 MPa

Show Material materials with Resistencia a la tracción of 450 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

450 - 600 MPa

Show Material materials with Resistencia a la tracción of 450 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 680 MPa

Show Material materials with Resistencia a la tracción of 470 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

470 - 630 MPa

Show Material materials with Resistencia a la tracción of 470 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

470 - 600 MPa

Show Material materials with Resistencia a la tracción of 470 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

470 - 680 MPa

Show Material materials with Resistencia a la tracción of 470 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 630 MPa

Show Material materials with Resistencia a la tracción of 470 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 600 MPa

Show Material materials with Resistencia a la tracción of 470 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

490 - 680 MPa

Show Material materials with Resistencia a la tracción of 490 - 680 MPa

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

20 °C

490 - 630 MPa

Show Material materials with Resistencia a la tracción of 490 - 630 MPa

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

20 °C

510 - 680 MPa

Show Material materials with Resistencia a la tracción of 510 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

510 - 630 MPa

Show Material materials with Resistencia a la tracción of 510 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

510 - 600 MPa

Show Material materials with Resistencia a la tracción of 510 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

510 - 680 MPa

Show Material materials with Resistencia a la tracción of 510 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

510 - 630 MPa

Show Material materials with Resistencia a la tracción of 510 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

510 - 600 MPa

Show Material materials with Resistencia a la tracción of 510 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Chemical properties

PropertyValueConditionRelated StandardsShape

Azufre

0.035 %

Show Material materials with Azufre of 0.035 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

0.04 %

Show Material materials with Azufre of 0.04 %

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Carbono

0.16 %

Show Material materials with Carbono of 0.16 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Circonio

0.15 %

Show Material materials with Circonio of 0.15 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Cobre

0.25 - 0.55 %

Show Material materials with Cobre of 0.25 - 0.55 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Cromo

0.4 - 0.8 %

Show Material materials with Cromo of 0.4 - 0.8 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Fósforo

0.035 %

Show Material materials with Fósforo of 0.035 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

0.04 %

Show Material materials with Fósforo of 0.04 %

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Manganeso

0.5 - 1.5 %

Show Material materials with Manganeso of 0.5 - 1.5 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

0.5 - 1 %

Show Material materials with Manganeso of 0.5 - 1 %

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Molibdeno

0.3 %

Show Material materials with Molibdeno of 0.3 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Nitrógeno

0.009 %

Show Material materials with Nitrógeno of 0.009 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Níquel

0.65 %

Show Material materials with Níquel of 0.65 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Silicona

0.5 %

Show Material materials with Silicona of 0.5 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Technological properties

Property
Supplier Disclaimer

The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.