EN 10209 Grade DC03ED cold rolled, skin passed

Want to keep this datasheet? Save it now in your required format

Description

Cold rolled low carbon steel for flat products for vitreous enamelling (direct enamelling, as well as for special applications of conventional two coat enamelling for better sag resistance). Application: domestic appliances (cooking, laundry), sanitary ware (bathtubs, shower trays, sinks), architectural panels (interior and exterior), signage,The soft unalloyed steel DCO1ED, mat. No. 1.0399, is a cold formable steel and suitable for direct enameling as well as for special conventional applications of two-coat enameling, especially if there should be preferably enameled non deforming. In this case are necessary special measures in order to improve enamel`s adhesion. Mechanical specific values and freedom of stretcher strains are warranted for 6 months. Application: simple reforming parts pots, pans, covering caps for gas kitchen stoves, baking sheets, simple shower bases etc. Welding: DC01ED is weldable acc. to the fusion welding methods: MAG (metal active gas/plasma welding arc hand welding laser welding gas welding resistance welding (spot, roll seam, buckle welding)

Related Standards

EN 10209

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	20.0 °C	7.8 - 7.9 g/cm³ Show Material materials with Densidad of 7.8 - 7.9 g/cm³	Typical for Low Carbon Steel

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	20.0 °C	0.29 [-] Show Material materials with Coeficiente de Poisson of 0.29 [-]	Typical for Low Carbon Steel
Elongación A80	20.0 °C	34 % Show Material materials with Elongación A80 of 34 %
Elongación A80 transversal	20.0 °C	30 - 34 % Show Material materials with Elongación A80 transversal of 30 - 34 %
Límite elástico	20.0 °C	140 - 240 MPa Show Material materials with Límite elástico of 140 - 240 MPa
Límite elástico transversal	20.0 °C	140 - 280 MPa Show Material materials with Límite elástico transversal of 140 - 280 MPa
Módulo elástico	20.0 °C	200 - 215 GPa Show Material materials with Módulo elástico of 200 - 215 GPa	Typical for Low Carbon Steel
Resistencia a la tracción	20.0 °C	270 - 370 MPa Show Material materials with Resistencia a la tracción of 270 - 370 MPa
Resistencia a la tracción transversal	20.0 °C	270 - 370 MPa Show Material materials with Resistencia a la tracción transversal of 270 - 370 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	20.0 °C	1.32E-5 - 1.38E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.32E-5 - 1.38E-5 1/K	Typical for Low Carbon Steel
Temperatura de fusión		1480 - 1526 °C Show Material materials with Temperatura de fusión of 1480 - 1526 °C	Typical for Low Carbon Steel

Magnético

Property	Value	Comment
Temperatura de Curie	770 °C Show Material materials with Temperatura de Curie of 770 °C	Typical for Low Carbon Steel

Chemical properties

Property	Value
Azufre	0.05 % Show Material materials with Azufre of 0.05 %
Carbono	4E-3 % Show Material materials with Carbono of 4E-3 %
Fósforo	0.04 % Show Material materials with Fósforo of 0.04 %
Manganeso	0.4 % Show Material materials with Manganeso of 0.4 %

Looking for suppliers of this material? Click to see 1 supplier of EN 10209 Grade DC03ED cold rolled, skin passed on Matmatch