EN 10208-2 Grade L415MB thermomechanically rolled

Want to keep this datasheet? Save it now in your required format

Description

Steel L415MB is produced as welded pipe for flammable media in condition thermomechanically rolled. Its yield stress is between 415 and 564 N/mm². The steel is weldable, its carbon equivalent CEV accounts for max. 0.42. To the welding seam (welding methods SAW, COW) applies a mandrel-diameter for the bending test of 5x nominal thickness of the pipe. Pipes are available with interior and exterior coating. Main fields of application are long-distance pipelines for flammable liquids (e.g. crude oil and natural gas products) as well as for compressed and liquefied flammable gases. Pipes acc. to DIN EN 10208-2 : 1996-08 also fulfil the conditions decisive for the consumption acc. to standards 5L, 5LX and 5LS of the American Petroleum Institute (API). When using these pipes has to be considered the Technical rule for flammable liquids (Technische Regel für brennbare FlüssigkeitenTRbF 301).

Related Standards

EN 10208-2

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	7.8 g/cm³ Show Material materials with Densidad of 7.8 g/cm³	Typical for Steel

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Steel
Elongación	20.0 °C	20 % Show Material materials with Elongación of 20 %
Elongación transversal	20.0 °C	18 % Show Material materials with Elongación transversal of 18 %
Límite elástico	20.0 °C	415 - 565 MPa Show Material materials with Límite elástico of 415 - 565 MPa
Límite elástico Rp0.5	20.0 °C	415 - 565 MPa Show Material materials with Límite elástico Rp0.5 of 415 - 565 MPa
Módulo elástico	23.0 °C	190 - 210 GPa Show Material materials with Módulo elástico of 190 - 210 GPa	Typical for Steel
Resistencia a la tracción	20.0 °C	520 MPa Show Material materials with Resistencia a la tracción of 520 MPa

Chemical properties

Property	Value
Aluminio	0.015 - 0.06 % Show Material materials with Aluminio of 0.015 - 0.06 %
Azufre	0.02 % Show Material materials with Azufre of 0.02 %
Carbono	0.16 % Show Material materials with Carbono of 0.16 %
Cobre	0.25 % Show Material materials with Cobre of 0.25 %
Cromo	0.3 % Show Material materials with Cromo of 0.3 %
Fósforo	0.03 % Show Material materials with Fósforo of 0.03 %
Manganeso	1.6 % Show Material materials with Manganeso of 1.6 %
Molibdeno	0.1 % Show Material materials with Molibdeno of 0.1 %
Niobio	0.05 % Show Material materials with Niobio of 0.05 %
Nitrógeno	0.01 % Show Material materials with Nitrógeno of 0.01 %
Níquel	0.3 % Show Material materials with Níquel of 0.3 %
Silicona	0.45 % Show Material materials with Silicona of 0.45 %
Titanio	0.06 % Show Material materials with Titanio of 0.06 %
Vanadio	0.08 % Show Material materials with Vanadio of 0.08 %

Looking for suppliers of this material? Click to see 2 supplier of EN 10208-2 Grade L415MB thermomechanically rolled on Matmatch