EN 10028-7 Grade X2CrNiMoN22-5-3 solution annealed (+AT)

View suppliers (28)
Want to keep this datasheet? Save it now in your required format

Description

The ferritic-austenitic steel X2CrNiMoN22-5-3 is high resistant to stress corrosion in chloride-containing media. Favorable resistance to pitting corrosion and intercrystalline corrosion even in sensitized resp. welded condition. The steel shows favorable general resistance in many corrosive media, such as organic and inorganic acids, resistance under acid gas conditions and favorable hot and cold forming property, It is weldable. Application: chemical and petrochemical industry, for pressure vessels, heat-exchanger and tubes, offshore-engineering Application temperature: -10 to 280 °C

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

7.8 g/cm³

Show Material materials with Densidad of 7.8 g/cm³

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Duplex Stainless Steel

Elongación

20.0 °C

20 - 25 %

Show Material materials with Elongación of 20 - 25 %

Elongación A80

20.0 °C

20 - 25 %

Show Material materials with Elongación A80 of 20 - 25 %

Elongación A80 transversal

20.0 °C

20 - 25 %

Show Material materials with Elongación A80 transversal of 20 - 25 %

Elongación transversal

20.0 °C

20 - 25 %

Show Material materials with Elongación transversal of 20 - 25 %

Límite elástico Rp 0,2

50.0 °C

422 MPa

Show Material materials with Límite elástico Rp 0,2 of 422 MPa

100.0 °C

360 MPa

Show Material materials with Límite elástico Rp 0,2 of 360 MPa

150.0 °C

335 MPa

Show Material materials with Límite elástico Rp 0,2 of 335 MPa

200.0 °C

315 MPa

Show Material materials with Límite elástico Rp 0,2 of 315 MPa

250.0 °C

300 MPa

Show Material materials with Límite elástico Rp 0,2 of 300 MPa

Límite elástico transversal Rp 0,2

20.0 °C

445 - 500 MPa

Show Material materials with Límite elástico transversal Rp 0,2 of 445 - 500 MPa

Módulo de cizallamiento

23.0 °C

77 GPa

Show Material materials with Módulo de cizallamiento of 77 GPa

Typical for Duplex Stainless Steel

Módulo elástico

20.0 °C

200 - 212 GPa

Show Material materials with Módulo elástico of 200 - 212 GPa

100.0 °C

194 - 206 GPa

Show Material materials with Módulo elástico of 194 - 206 GPa

200.0 °C

186 GPa

Show Material materials with Módulo elástico of 186 GPa

300.0 °C

180 GPa

Show Material materials with Módulo elástico of 180 GPa

Unlock all property charts

Resistencia a la tracción

20.0 °C

640 - 950 MPa

Show Material materials with Resistencia a la tracción of 640 - 950 MPa

50.0 °C

621 MPa

Show Material materials with Resistencia a la tracción of 621 MPa

100.0 °C

590 MPa

Show Material materials with Resistencia a la tracción of 590 MPa

150.0 °C

570 MPa

Show Material materials with Resistencia a la tracción of 570 MPa

200.0 °C

550 MPa

Show Material materials with Resistencia a la tracción of 550 MPa

250.0 °C

540 MPa

Show Material materials with Resistencia a la tracción of 540 MPa

Unlock all property charts

Resistencia a la tracción transversal

20.0 °C

640 - 950 MPa

Show Material materials with Resistencia a la tracción transversal of 640 - 950 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

20.0 °C

500 J/(kg·K)

Show Material materials with Calor específico of 500 J/(kg·K)

Coeficiente de dilatación térmica

100.0 °C

1.3E-5 - 1.33E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.3E-5 - 1.33E-5 1/K

200.0 °C

1.35E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.35E-5 1/K

300.0 °C

1.4E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.4E-5 1/K

Unlock all property charts

Conductividad térmica

20.0 °C

13.4 - 15 W/(m·K)

Show Material materials with Conductividad térmica of 13.4 - 15 W/(m·K)

100.0 °C

14.9 W/(m·K)

Show Material materials with Conductividad térmica of 14.9 W/(m·K)

Unlock all property charts

Temperatura de fusión

1375 - 1450 °C

Show Material materials with Temperatura de fusión of 1375 - 1450 °C

Typical for Duplex Stainless Steel

Temperatura máx. de funcionamiento

300 °C

Show Material materials with Temperatura máx. de funcionamiento of 300 °C

Typical for Duplex Stainless Steel

Temperatura máx. de funcionamiento, largo

-10 - 280 °C

Show Material materials with Temperatura máx. de funcionamiento, largo of -10 - 280 °C

Eléctrico

PropertyTemperatureValue

Resistividad eléctrica

20.0 °C

7.85E-7 - 8E-7 Ω·m

Show Material materials with Resistividad eléctrica of 7.85E-7 - 8E-7 Ω·m

100.0 °C

8.44E-7 Ω·m

Show Material materials with Resistividad eléctrica of 8.44E-7 Ω·m

Unlock all property charts

Chemical properties

PropertyValue

Azufre

0.015 %

Show Material materials with Azufre of 0.015 %

Carbono

0.03 %

Show Material materials with Carbono of 0.03 %

Cromo

21 - 23 %

Show Material materials with Cromo of 21 - 23 %

Fósforo

0.04 %

Show Material materials with Fósforo of 0.04 %

Manganeso

2 %

Show Material materials with Manganeso of 2 %

Molibdeno

2.5 - 3.5 %

Show Material materials with Molibdeno of 2.5 - 3.5 %

Nitrógeno

0.1 - 0.22 %

Show Material materials with Nitrógeno of 0.1 - 0.22 %

Níquel

4.5 - 6.5 %

Show Material materials with Níquel of 4.5 - 6.5 %

Silicona

1 %

Show Material materials with Silicona of 1 %