EN 10095 Grade X9CrNiSiNCe21-11-2 solution annealed (+AT)

Want to keep this datasheet? Save it now in your required format

Description

Fully austenitic steel of high scaling temp. of 1150°C in air (highest application temp. in air), warranted scaling resistance for wide and fast thermal fluctuation, but no resistance in reducing athmosphere. Excellent creep behaviour and high deformation resistance. Application for furnace components, hood annealing and muffle furnaces, lifting bar furnaces, sealing sheets, radiator tubes, charging cages, insert boxes, recuperators as well as for combustion nozzles and for strongly loaded components of waste gas detoxification facilities.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.8 g/cm³ Show Material materials with Densidad of 7.8 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Austenitic Stainless Steel
Dureza Brinell	20.0 °C	210 [-] Show Material materials with Dureza Brinell of 210 [-]
Elongación	20.0 °C	40 % Show Material materials with Elongación of 40 %
Elongación A80	20.0 °C	37 % Show Material materials with Elongación A80 of 37 %
Límite elástico Rp 0,2	20.0 °C	310 MPa Show Material materials with Límite elástico Rp 0,2 of 310 MPa
Límite elástico Rp 1,0	20.0 °C	350 MPa Show Material materials with Límite elástico Rp 1,0 of 350 MPa
Módulo de cizallamiento	23.0 °C	77 GPa Show Material materials with Módulo de cizallamiento of 77 GPa	Typical for Austenitic Stainless Steel
Módulo elástico	23.0 °C	195 GPa Show Material materials with Módulo elástico of 195 GPa	Typical for Austenitic Stainless Steel
Resistencia a la tracción	20.0 °C	650 - 850 MPa Show Material materials with Resistencia a la tracción of 650 - 850 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	500 J/(kg·K) Show Material materials with Calor específico of 500 J/(kg·K)
	600.0 °C	660 J/(kg·K) Show Material materials with Calor específico of 660 J/(kg·K)

Coeficiente de dilatación térmica	200.0 °C	1.7E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.7E-5 1/K
	400.0 °C	1.8E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.8E-5 1/K
	600.0 °C	1.85E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.85E-5 1/K
	800.0 °C	1.9E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.9E-5 1/K
	1000.0 °C	1.95E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.95E-5 1/K
	Unlock all property charts
Conductividad térmica	20.0 °C	15 W/(m·K) Show Material materials with Conductividad térmica of 15 W/(m·K)
	500.0 °C	21 W/(m·K) Show Material materials with Conductividad térmica of 21 W/(m·K)
	Unlock all property charts
Temperatura de fusión		1230 - 1480 °C Show Material materials with Temperatura de fusión of 1230 - 1480 °C	Typical for Austenitic Stainless Steel
Temperatura máx. de funcionamiento, largo		0 - 1150 °C Show Material materials with Temperatura máx. de funcionamiento, largo of 0 - 1150 °C

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	8.5E-7 Ω·m Show Material materials with Resistividad eléctrica of 8.5E-7 Ω·m

Chemical properties

Property	Value
Azufre	0.015 % Show Material materials with Azufre of 0.015 %
Carbono	0.05 - 0.12 % Show Material materials with Carbono of 0.05 - 0.12 %
Cerio	0.03 - 0.08 % Show Material materials with Cerio of 0.03 - 0.08 %
Cromo	20 - 22 % Show Material materials with Cromo of 20 - 22 %
Fósforo	0.05 % Show Material materials with Fósforo of 0.05 %
Manganeso	1 % Show Material materials with Manganeso of 1 %
Nitrógeno	0.12 - 0.2 % Show Material materials with Nitrógeno of 0.12 - 0.2 %
Níquel	10 - 12 % Show Material materials with Níquel of 10 - 12 %
Silicona	1.4 - 2.5 % Show Material materials with Silicona of 1.4 - 2.5 %

Looking for suppliers of this material? Click to see 3 supplier of EN 10095 Grade X9CrNiSiNCe21-11-2 solution annealed (+AT) on Matmatch