EN 10095 Grade NiCr15Fe soft annealed (+A)

Want to keep this datasheet? Save it now in your required format

Description

NiCr15Fe, contained in VdTÜV-material specification 305 : 1984-03 and supplement 305 : 1990-06 is an unhardenable alloy for application in wetchemical sector and at high temperatures. Material`s versatility causes a wide application range from low temperature range up to approx. 1150°C (highest application temperatures in air). Usable on oxidizing conditions due to the Cr-content, resistance to reducing conditions due to the high Ni-content. The alloy shows excellent properties also at high temperatures, in ammoniacal gases as well as in nitriding or carburizing athmosphere. It represents the standard material in furnace construction due to its high-temperature strength and corrosion resistance at increased temperatures as well as its favorable processability. NiCr15Fe shows favorable resistance to stress corrosion in the presence of chloride ions. The material is reliable in chemical engineering, application in caustic soda, formic acid, acetic acid and fatty acids. NiCr15Fe is suitable at temperatures of up to 550°C in dry gases, such as hydrogen chloride or chloric gas. Use in nuclear power engineering due to favorable resistance in high-purity water. Application for ammonia cracking facilities, gas carburization plants, nitration furnaces, production facilities for chlorinated and fluorinated hydrocarbon, ethylene dichloride cracking tubes, production lines for alkaline products, reactors and heat-exchanger in vinyl chloride production lines, facility components for production of sodium sulfide, steam generator tubes in nuclear power engineering. Processing properties: formability: good weldability: good machinability: good

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Suppliers with similar grades

VDM METALS

FABRICANTE Y DISTRIBUIDOR

SALOMON'S METALEN

DISTRIBUIDOR

ALLEIMA (FORMERLY SANDVIK MATERIALS TECHNOLOGY)

FABRICANTE

Information and services

Additional services:

To ensure our customers' processes and/or products attain – and even exceed – their performance expectations, we offer a wide range of services within both the technical area and delivery logistics. Our technical services include: • Material consultations through our worldwide sales network • Advice in process optimization based on an in-depth applications knowledge • Joint new product development supported by our extensive R&D program View product groups and services

There are 7 other suppliers for this grade.

Preview all suppliers

Lectura sugerida

Inconel 625: Properties, Applications and Production

Inconel 718: Properties, Applications and Production

Nickel-Based Superalloys: Properties, Production, and Applications

Superalloys: Properties, Processing, and Applications

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8.4 g/cm³ Show Material materials with Densidad of 8.4 g/cm³

Mecánica

Property	Temperature	Value
Dureza Brinell	20.0 °C	200 [-] Show Material materials with Dureza Brinell of 200 [-]
Elongación	20.0 °C	30 % Show Material materials with Elongación of 30 %
Elongación A80	20.0 °C	30 % Show Material materials with Elongación A80 of 30 %
Límite elástico Rp 0,2	20.0 °C	240 MPa Show Material materials with Límite elástico Rp 0,2 of 240 MPa
Módulo elástico	20.0 °C	214 GPa Show Material materials with Módulo elástico of 214 GPa
	100.0 °C	209 GPa Show Material materials with Módulo elástico of 209 GPa
	200.0 °C	205 GPa Show Material materials with Módulo elástico of 205 GPa
	300.0 °C	200 GPa Show Material materials with Módulo elástico of 200 GPa
	400.0 °C	194 GPa Show Material materials with Módulo elástico of 194 GPa
	500.0 °C	187 GPa Show Material materials with Módulo elástico of 187 GPa
	600.0 °C	180 GPa Show Material materials with Módulo elástico of 180 GPa
	700.0 °C	172 GPa Show Material materials with Módulo elástico of 172 GPa
	800.0 °C	163 GPa Show Material materials with Módulo elástico of 163 GPa
	900.0 °C	153 GPa Show Material materials with Módulo elástico of 153 GPa
	1000.0 °C	143 GPa Show Material materials with Módulo elástico of 143 GPa

Resistencia a la tracción	20.0 °C	500 - 850 MPa Show Material materials with Resistencia a la tracción of 500 - 850 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	455 - 460 J/(kg·K) Show Material materials with Calor específico of 455 - 460 J/(kg·K)
	100.0 °C	475 J/(kg·K) Show Material materials with Calor específico of 475 J/(kg·K)
	200.0 °C	495 J/(kg·K) Show Material materials with Calor específico of 495 J/(kg·K)
	300.0 °C	508 J/(kg·K) Show Material materials with Calor específico of 508 J/(kg·K)
	400.0 °C	525 J/(kg·K) Show Material materials with Calor específico of 525 J/(kg·K)
	500.0 °C	550 J/(kg·K) Show Material materials with Calor específico of 550 J/(kg·K)
	600.0 °C	572 J/(kg·K) Show Material materials with Calor específico of 572 J/(kg·K)
	700.0 °C	602 J/(kg·K) Show Material materials with Calor específico of 602 J/(kg·K)
	800.0 °C	620 J/(kg·K) Show Material materials with Calor específico of 620 J/(kg·K)
	900.0 °C	630 J/(kg·K) Show Material materials with Calor específico of 630 J/(kg·K)
	1000.0 °C	635 J/(kg·K) Show Material materials with Calor específico of 635 J/(kg·K)
	Unlock all property charts
Coeficiente de dilatación térmica	100.0 °C	1.37E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.37E-5 1/K
	200.0 °C	1.39E-5 - 1.41E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.39E-5 - 1.41E-5 1/K
	300.0 °C	1.44E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.44E-5 1/K
	400.0 °C	1.45E-5 - 1.48E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.45E-5 - 1.48E-5 1/K
	500.0 °C	1.51E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.51E-5 1/K
	600.0 °C	1.53E-5 - 1.54E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.53E-5 - 1.54E-5 1/K
	700.0 °C	1.58E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.58E-5 1/K
	800.0 °C	1.61E-5 - 1.62E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.61E-5 - 1.62E-5 1/K
	900.0 °C	1.64E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.64E-5 1/K
	1000.0 °C	1.68E-5 - 1.69E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.68E-5 - 1.69E-5 1/K
	Unlock all property charts
Conductividad térmica	20.0 °C	14.8 - 15 W/(m·K) Show Material materials with Conductividad térmica of 14.8 - 15 W/(m·K)
	100.0 °C	15.8 W/(m·K) Show Material materials with Conductividad térmica of 15.8 W/(m·K)
	200.0 °C	17 W/(m·K) Show Material materials with Conductividad térmica of 17 W/(m·K)
	300.0 °C	18.4 W/(m·K) Show Material materials with Conductividad térmica of 18.4 W/(m·K)
	400.0 °C	20 W/(m·K) Show Material materials with Conductividad térmica of 20 W/(m·K)
	500.0 °C	22 W/(m·K) Show Material materials with Conductividad térmica of 22 W/(m·K)
	600.0 °C	24 W/(m·K) Show Material materials with Conductividad térmica of 24 W/(m·K)
	700.0 °C	25.7 W/(m·K) Show Material materials with Conductividad térmica of 25.7 W/(m·K)
	800.0 °C	27.5 W/(m·K) Show Material materials with Conductividad térmica of 27.5 W/(m·K)
	900.0 °C	29.4 W/(m·K) Show Material materials with Conductividad térmica of 29.4 W/(m·K)
	1000.0 °C	31.2 W/(m·K) Show Material materials with Conductividad térmica of 31.2 W/(m·K)
	Unlock all property charts
Temperatura de fusión		1200 - 1480 °C Show Material materials with Temperatura de fusión of 1200 - 1480 °C	Typical for Nickel Chromium Iron Alloy
Temperatura máx. de funcionamiento, largo		0 - 1150 °C Show Material materials with Temperatura máx. de funcionamiento, largo of 0 - 1150 °C

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	1.03E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.03E-6 Ω·m
	100.0 °C	1.04E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.04E-6 Ω·m
	200.0 °C	1.06E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.06E-6 Ω·m
	300.0 °C	1.07E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.07E-6 Ω·m
	400.0 °C	1.08E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.08E-6 Ω·m
	500.0 °C	1.11E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.11E-6 Ω·m
	600.0 °C	1.12E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.12E-6 Ω·m
	700.0 °C	1.12E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.12E-6 Ω·m
	800.0 °C	1.12E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.12E-6 Ω·m
	900.0 °C	1.13E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.13E-6 Ω·m
	1000.0 °C	1.14E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.14E-6 Ω·m
	Unlock all property charts

Chemical properties

Property	Value
Aluminio	0.3 % Show Material materials with Aluminio of 0.3 %
Azufre	0.015 % Show Material materials with Azufre of 0.015 %
Carbono	0.05 - 0.1 % Show Material materials with Carbono of 0.05 - 0.1 %
Cobre	0.5 % Show Material materials with Cobre of 0.5 %
Cromo	14 - 17 % Show Material materials with Cromo of 14 - 17 %
Fósforo	0.02 % Show Material materials with Fósforo of 0.02 %
Hierro	6 - 10 % Show Material materials with Hierro of 6 - 10 %
Manganeso	1 % Show Material materials with Manganeso of 1 %
Níquel	72 % Show Material materials with Níquel of 72 %
Silicona	0.5 % Show Material materials with Silicona of 0.5 %
Titanio	0.3 % Show Material materials with Titanio of 0.3 %

Looking for suppliers of this material? Click to see 10 supplier of EN 10095 Grade NiCr15Fe soft annealed (+A) on Matmatch