EN 10213 Grade G17NiCrMo13-6 quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

Material G17NiCrMo13-6 is equivalent to trademark GS-18 NiCrMo 12 6 acc. to SEW520-90. It is used at low temperatures. It is applicated in pressure vessel and vehicle construction, in plant and crane construction, in offshore engineering as well as in mine support at temperatures conditional on climate. The cast material is suitable for fusion welding and well weldable. It has proved itself in composite welding constructions, especially in compound with rolled and forged products made of high-strength tempered welding constructions. It is characterized by high 0,2% proof strength values and relatively high notch impact energy values.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.85 g/cm³ Show Material materials with Densidad of 7.85 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.29 [-] Show Material materials with Coeficiente de Poisson of 0.29 [-]	Typical for Nickel Chromium Molybdenum Steel
Elongación	20.0 °C	15 % Show Material materials with Elongación of 15 %
Límite elástico Rp 0,2	20.0 °C	600 MPa Show Material materials with Límite elástico Rp 0,2 of 600 MPa
Módulo elástico	23.0 °C	200 - 215 GPa Show Material materials with Módulo elástico of 200 - 215 GPa	Typical for Nickel Chromium Molybdenum Steel
Resistencia a la tracción	20.0 °C	750 - 900 MPa Show Material materials with Resistencia a la tracción of 750 - 900 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	460 J/(kg·K) Show Material materials with Calor específico of 460 J/(kg·K)
Coeficiente de dilatación térmica	23.0 °C	1E-5 - 1.3E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1E-5 - 1.3E-5 1/K	Typical for Nickel Chromium Molybdenum Steel
Conductividad térmica	23.0 °C	34 - 54 W/(m·K) Show Material materials with Conductividad térmica of 34 - 54 W/(m·K)	Typical for Nickel Chromium Molybdenum Steel
Temperatura de fusión		1382 - 1529 °C Show Material materials with Temperatura de fusión of 1382 - 1529 °C	Typical for Nickel Chromium Molybdenum Steel
Temperatura máx. de funcionamiento, largo		-120 - -30 °C Show Material materials with Temperatura máx. de funcionamiento, largo of -120 - -30 °C

Chemical properties

Property	Value
Azufre	0.015 % Show Material materials with Azufre of 0.015 %
Carbono	0.15 - 0.19 % Show Material materials with Carbono of 0.15 - 0.19 %
Cobre	0.3 % Show Material materials with Cobre of 0.3 %
Cromo	1.3 - 1.8 % Show Material materials with Cromo of 1.3 - 1.8 %
Fósforo	0.02 % Show Material materials with Fósforo of 0.02 %
Manganeso	0.55 - 0.8 % Show Material materials with Manganeso of 0.55 - 0.8 %
Molibdeno	0.45 - 0.6 % Show Material materials with Molibdeno of 0.45 - 0.6 %
Níquel	3 - 3.5 % Show Material materials with Níquel of 3 - 3.5 %
Silicona	0.5 % Show Material materials with Silicona of 0.5 %
Vanadio	0.05 % Show Material materials with Vanadio of 0.05 %