EN 10216-2 Grade X11CrMo9-1 +I,isothermic annealed

Want to keep this datasheet? Save it now in your required format

Description

Seamless steel tube for pressure purposes with specified elevated temperature properties. The steel grade meet the essential requirements of Directive 97/23/EC.,Seamless tubes of the high-temperature X11CrMo9-1+I are used in steam boiler and pipeline construction, pressure vessel and apparatus engineering, especially in chemical industry and power station construction at temperatures from approx. 200 °C to maximum 400 °C and simultaneously high pressures. The total load and the special scaling circumstances can decrease or increase the temperature limit. Weldability is available.,Seamless tubes of the high-temperature X11CrMo9-1+I are used in steam boiler and pipeline construction, pressure vessel and apparatus engineering, especially in chemical industry and power station construction at temperatures up to approx. 550 °C and simultaneously high pressures. The total load and the special scaling circumstances can decrease or increase the temperature limit. When welding it should be considered that the behavior of the steel depends during and after welding on the applied heat treatment, the preparation and execution of the welding.

Related Standards

EN 10216-2

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.77 g/cm³ Show Material materials with Densidad of 7.77 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	20.0 °C	0.29 [-] Show Material materials with Coeficiente de Poisson of 0.29 [-]	Typical for Chromium Molybdenum Steel
Elongación	20.0 °C	20 % Show Material materials with Elongación of 20 %
Elongación transversal	20.0 °C	18 % Show Material materials with Elongación transversal of 18 %
Límite elástico Rp 0,2	20.0 °C	210 MPa Show Material materials with Límite elástico Rp 0,2 of 210 MPa
	100.0 °C	187 MPa Show Material materials with Límite elástico Rp 0,2 of 187 MPa
	150.0 °C	186 MPa Show Material materials with Límite elástico Rp 0,2 of 186 MPa
	200.0 °C	178 MPa Show Material materials with Límite elástico Rp 0,2 of 178 MPa
	250.0 °C	177 MPa Show Material materials with Límite elástico Rp 0,2 of 177 MPa
	300.0 °C	175 MPa Show Material materials with Límite elástico Rp 0,2 of 175 MPa
	350.0 °C	171 MPa Show Material materials with Límite elástico Rp 0,2 of 171 MPa
	400.0 °C	164 MPa Show Material materials with Límite elástico Rp 0,2 of 164 MPa
	450.0 °C	153 MPa Show Material materials with Límite elástico Rp 0,2 of 153 MPa
	500.0 °C	142 MPa Show Material materials with Límite elástico Rp 0,2 of 142 MPa
	550.0 °C	120 MPa Show Material materials with Límite elástico Rp 0,2 of 120 MPa

Límite elástico transversal Rp 0,2	20.0 °C	210 MPa Show Material materials with Límite elástico transversal Rp 0,2 of 210 MPa
Módulo elástico	20.0 °C	218 GPa Show Material materials with Módulo elástico of 218 GPa
	100.0 °C	213 GPa Show Material materials with Módulo elástico of 213 GPa
	200.0 °C	206 GPa Show Material materials with Módulo elástico of 206 GPa
	300.0 °C	198 GPa Show Material materials with Módulo elástico of 198 GPa
	400.0 °C	190 GPa Show Material materials with Módulo elástico of 190 GPa
	500.0 °C	180 GPa Show Material materials with Módulo elástico of 180 GPa
	600.0 °C	167 GPa Show Material materials with Módulo elástico of 167 GPa
	700.0 °C	150 GPa Show Material materials with Módulo elástico of 150 GPa
	Unlock all property charts
Resistencia a la tracción	20.0 °C	460 - 640 MPa Show Material materials with Resistencia a la tracción of 460 - 640 MPa
Resistencia a la tracción transversal	20.0 °C	460 - 640 MPa Show Material materials with Resistencia a la tracción transversal of 460 - 640 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	429 J/(kg·K) Show Material materials with Calor específico of 429 J/(kg·K)
	100.0 °C	464 J/(kg·K) Show Material materials with Calor específico of 464 J/(kg·K)
	200.0 °C	492 J/(kg·K) Show Material materials with Calor específico of 492 J/(kg·K)
	300.0 °C	511 J/(kg·K) Show Material materials with Calor específico of 511 J/(kg·K)
	400.0 °C	531 J/(kg·K) Show Material materials with Calor específico of 531 J/(kg·K)
	500.0 °C	554 J/(kg·K) Show Material materials with Calor específico of 554 J/(kg·K)
	600.0 °C	585 J/(kg·K) Show Material materials with Calor específico of 585 J/(kg·K)
	700.0 °C	626 J/(kg·K) Show Material materials with Calor específico of 626 J/(kg·K)
	Unlock all property charts
Coeficiente de dilatación térmica	-100.0 °C	1E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1E-5 1/K
	20.0 °C	1.08E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.08E-5 1/K
	100.0 °C	1.13E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.13E-5 1/K
	200.0 °C	1.18E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.18E-5 1/K
	300.0 °C	1.23E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.23E-5 1/K
	400.0 °C	1.27E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.27E-5 1/K
	500.0 °C	1.3E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.3E-5 1/K
	600.0 °C	1.32E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.32E-5 1/K
	700.0 °C	1.33E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.33E-5 1/K
	Unlock all property charts
Conductividad térmica	20.0 °C	20.7 W/(m·K) Show Material materials with Conductividad térmica of 20.7 W/(m·K)
	100.0 °C	22.6 W/(m·K) Show Material materials with Conductividad térmica of 22.6 W/(m·K)
	200.0 °C	24.4 W/(m·K) Show Material materials with Conductividad térmica of 24.4 W/(m·K)
	300.0 °C	25.8 W/(m·K) Show Material materials with Conductividad térmica of 25.8 W/(m·K)
	400.0 °C	26.9 W/(m·K) Show Material materials with Conductividad térmica of 26.9 W/(m·K)
	500.0 °C	27.8 W/(m·K) Show Material materials with Conductividad térmica of 27.8 W/(m·K)
	600.0 °C	28.5 W/(m·K) Show Material materials with Conductividad térmica of 28.5 W/(m·K)
	700.0 °C	28.8 W/(m·K) Show Material materials with Conductividad térmica of 28.8 W/(m·K)
	Unlock all property charts
Difusividad térmica	20.0 °C	6.2 mm²/s Show Material materials with Difusividad térmica of 6.2 mm²/s
	100.0 °C	5.9 mm²/s Show Material materials with Difusividad térmica of 5.9 mm²/s
	200.0 °C	6 mm²/s Show Material materials with Difusividad térmica of 6 mm²/s
	300.0 °C	6 mm²/s Show Material materials with Difusividad térmica of 6 mm²/s
	400.0 °C	5.7 mm²/s Show Material materials with Difusividad térmica of 5.7 mm²/s
	500.0 °C	5.4 mm²/s Show Material materials with Difusividad térmica of 5.4 mm²/s
	600.0 °C	4.8 mm²/s Show Material materials with Difusividad térmica of 4.8 mm²/s
	700.0 °C	4 mm²/s Show Material materials with Difusividad térmica of 4 mm²/s
	Unlock all property charts
Temperatura de fusión		1382 - 1529 °C Show Material materials with Temperatura de fusión of 1382 - 1529 °C	Typical for Chromium Molybdenum Steel
Temperatura máx. de funcionamiento, largo		0 - 550 °C Show Material materials with Temperatura máx. de funcionamiento, largo of 0 - 550 °C

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	5.03E-7 Ω·m Show Material materials with Resistividad eléctrica of 5.03E-7 Ω·m
	100.0 °C	5.67E-7 Ω·m Show Material materials with Resistividad eléctrica of 5.67E-7 Ω·m
	200.0 °C	6.47E-7 Ω·m Show Material materials with Resistividad eléctrica of 6.47E-7 Ω·m
	300.0 °C	7.27E-7 Ω·m Show Material materials with Resistividad eléctrica of 7.27E-7 Ω·m
	400.0 °C	8.09E-7 Ω·m Show Material materials with Resistividad eléctrica of 8.09E-7 Ω·m
	500.0 °C	8.9E-7 Ω·m Show Material materials with Resistividad eléctrica of 8.9E-7 Ω·m
	600.0 °C	9.72E-7 Ω·m Show Material materials with Resistividad eléctrica of 9.72E-7 Ω·m
	700.0 °C	1.06E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.06E-6 Ω·m
	Unlock all property charts

Chemical properties

Property	Value
Aluminio	0.04 % Show Material materials with Aluminio of 0.04 %
Azufre	0.01 - 0.02 % Show Material materials with Azufre of 0.01 - 0.02 %
Carbono	0.08 - 0.15 % Show Material materials with Carbono of 0.08 - 0.15 %
Cobre	0.3 % Show Material materials with Cobre of 0.3 %
Cromo	8 - 10 % Show Material materials with Cromo of 8 - 10 %
Fósforo	0.03 % Show Material materials with Fósforo of 0.03 %
Manganeso	0.3 - 0.6 % Show Material materials with Manganeso of 0.3 - 0.6 %
Molibdeno	0.9 - 1.1 % Show Material materials with Molibdeno of 0.9 - 1.1 %
Silicona	0.25 - 1 % Show Material materials with Silicona of 0.25 - 1 %

Looking for suppliers of this material? Click to see 2 supplier of EN 10216-2 Grade X11CrMo9-1 +I,isothermic annealed on Matmatch