EN 10216-2 Grade X10CrMoVNb9-1 normalized and tempered (+NT)

View suppliers (10)
Want to keep this datasheet? Save it now in your required format

Description

Seamless tubes of the high-temperature X10CrMoVNb9-1 are used in steam boiler and pipeline construction, pressure vessel and apparatus engineering, especially in chemical industry and power station construction at temperatures from approx. 200 °C to maximum 400 °C and simultaneously high pressures. The total load and the special scaling circumstances can decrease or increase the temperature limit. Weldability is available.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

7.7 g/cm³

Show Material materials with Densidad of 7.7 g/cm³

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Martensitic Stainless Steel

Elongación

20.0 °C

19 %

Show Material materials with Elongación of 19 %

Elongación transversal

20.0 °C

17 %

Show Material materials with Elongación transversal of 17 %

Límite elástico Rp 0,2

20.0 °C

450 MPa

Show Material materials with Límite elástico Rp 0,2 of 450 MPa

100.0 °C

410 MPa

Show Material materials with Límite elástico Rp 0,2 of 410 MPa

150.0 °C

395 MPa

Show Material materials with Límite elástico Rp 0,2 of 395 MPa

200.0 °C

380 MPa

Show Material materials with Límite elástico Rp 0,2 of 380 MPa

250.0 °C

370 MPa

Show Material materials with Límite elástico Rp 0,2 of 370 MPa

300.0 °C

360 MPa

Show Material materials with Límite elástico Rp 0,2 of 360 MPa

350.0 °C

350 MPa

Show Material materials with Límite elástico Rp 0,2 of 350 MPa

400.0 °C

340 MPa

Show Material materials with Límite elástico Rp 0,2 of 340 MPa

450.0 °C

320 MPa

Show Material materials with Límite elástico Rp 0,2 of 320 MPa

500.0 °C

300 MPa

Show Material materials with Límite elástico Rp 0,2 of 300 MPa

550.0 °C

270 MPa

Show Material materials with Límite elástico Rp 0,2 of 270 MPa

600.0 °C

215 MPa

Show Material materials with Límite elástico Rp 0,2 of 215 MPa

Límite elástico transversal Rp 0,2

20.0 °C

450 MPa

Show Material materials with Límite elástico transversal Rp 0,2 of 450 MPa

Módulo de cizallamiento

23.0 °C

77 GPa

Show Material materials with Módulo de cizallamiento of 77 GPa

Typical for Martensitic Stainless Steel

Módulo elástico

20.0 °C

218 GPa

Show Material materials with Módulo elástico of 218 GPa

100.0 °C

213 GPa

Show Material materials with Módulo elástico of 213 GPa

200.0 °C

206 GPa

Show Material materials with Módulo elástico of 206 GPa

300.0 °C

198 GPa

Show Material materials with Módulo elástico of 198 GPa

400.0 °C

190 GPa

Show Material materials with Módulo elástico of 190 GPa

500.0 °C

180 GPa

Show Material materials with Módulo elástico of 180 GPa

600.0 °C

167 GPa

Show Material materials with Módulo elástico of 167 GPa

Unlock all property charts

Resistencia a la tracción

20.0 °C

630 - 830 MPa

Show Material materials with Resistencia a la tracción of 630 - 830 MPa

Resistencia a la tracción transversal

20.0 °C

630 - 830 MPa

Show Material materials with Resistencia a la tracción transversal of 630 - 830 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

23.0 °C

460 J/(kg·K)

Show Material materials with Calor específico of 460 J/(kg·K)

Typical for Martensitic Stainless Steel

Coeficiente de dilatación térmica

100.0 °C

1.09E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.09E-5 1/K

200.0 °C

1.13E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.13E-5 1/K

300.0 °C

1.17E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.17E-5 1/K

400.0 °C

1.2E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.2E-5 1/K

500.0 °C

1.23E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.23E-5 1/K

600.0 °C

1.26E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.26E-5 1/K

Unlock all property charts

Conductividad térmica

20.0 °C

26 W/(m·K)

Show Material materials with Conductividad térmica of 26 W/(m·K)

Temperatura de fusión

1370 - 1530 °C

Show Material materials with Temperatura de fusión of 1370 - 1530 °C

Typical for Martensitic Stainless Steel

Temperatura máx. de funcionamiento, largo

550 - 600 °C

Show Material materials with Temperatura máx. de funcionamiento, largo of 550 - 600 °C

Eléctrico

PropertyTemperatureValue

Resistividad eléctrica

20.0 °C

5E-7 Ω·m

Show Material materials with Resistividad eléctrica of 5E-7 Ω·m

Chemical properties

PropertyValue

Aluminio

0.02 - 0.04 %

Show Material materials with Aluminio of 0.02 - 0.04 %

Azufre

0.005 - 0.01 %

Show Material materials with Azufre of 0.005 - 0.01 %

Carbono

0.08 - 0.12 %

Show Material materials with Carbono of 0.08 - 0.12 %

Cobre

0.3 %

Show Material materials with Cobre of 0.3 %

Cromo

8 - 9.5 %

Show Material materials with Cromo of 8 - 9.5 %

Fósforo

0.02 %

Show Material materials with Fósforo of 0.02 %

Manganeso

0.3 - 0.6 %

Show Material materials with Manganeso of 0.3 - 0.6 %

Molibdeno

0.85 - 1.05 %

Show Material materials with Molibdeno of 0.85 - 1.05 %

Niobio

0.06 - 0.1 %

Show Material materials with Niobio of 0.06 - 0.1 %

Nitrógeno

0.03 - 0.07 %

Show Material materials with Nitrógeno of 0.03 - 0.07 %

Níquel

0.4 %

Show Material materials with Níquel of 0.4 %

Silicona

0.2 - 0.5 %

Show Material materials with Silicona of 0.2 - 0.5 %

Titanio

0.01 %

Show Material materials with Titanio of 0.01 %

Vanadio

0.18 - 0.25 %

Show Material materials with Vanadio of 0.18 - 0.25 %