EN 10137-2 Grade S890QL1 quenched and tempered (+QT)

View suppliers (1)
Want to keep this datasheet? Save it now in your required format

Description

S890QL1 is a tempered and weldable fine grained steel. yield point: >890 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -60°C is warranted a notch impact energy of 30 J (longitudinal test specimen) cold formability: for nominal size < 16 mm bending radius in transversal direction 3xs in longitudinal direction 4xs (s= nominal thickness) hot forming property: allowed only for stress relieve annealing temperature (max. 580°C) suitability for welding: Steel is weldable according to the common welding methods (EURONORM-INFORMATION Nr. 2 has to be considered)

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

7.8 g/cm³

Show Material materials with Densidad of 7.8 g/cm³

Typical for Steel

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Steel

Elongación

20.0 °C

11 %

Show Material materials with Elongación of 11 %

Límite elástico

20.0 °C

830 - 890 MPa

Show Material materials with Límite elástico of 830 - 890 MPa

Módulo elástico

23.0 °C

190 - 210 GPa

Show Material materials with Módulo elástico of 190 - 210 GPa

Typical for Steel

Resistencia a la tracción

20.0 °C

880 - 1100 MPa

Show Material materials with Resistencia a la tracción of 880 - 1100 MPa

Chemical properties

PropertyValue

Azufre

0.01 %

Show Material materials with Azufre of 0.01 %

Boro

5E-3 %

Show Material materials with Boro of 5E-3 %

Carbono

0.2 %

Show Material materials with Carbono of 0.2 %

Circonio

0.15 %

Show Material materials with Circonio of 0.15 %

Cobre

0.5 %

Show Material materials with Cobre of 0.5 %

Cromo

1.5 %

Show Material materials with Cromo of 1.5 %

Fósforo

0.02 %

Show Material materials with Fósforo of 0.02 %

Manganeso

1.7 %

Show Material materials with Manganeso of 1.7 %

Molibdeno

0.7 %

Show Material materials with Molibdeno of 0.7 %

Niobio

0.06 %

Show Material materials with Niobio of 0.06 %

Nitrógeno

0.02 %

Show Material materials with Nitrógeno of 0.02 %

Níquel

2 %

Show Material materials with Níquel of 2 %

Silicona

0.8 %

Show Material materials with Silicona of 0.8 %

Titanio

0.05 %

Show Material materials with Titanio of 0.05 %

Vanadio

0.12 %

Show Material materials with Vanadio of 0.12 %