EN 10137-3 Grade S620AL quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

S620AL is a precipitation hardening and weldable fine grained steel. yield point: >620 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -40°C is warranted a notch impact energy of 40 J (longitudinal test specimen) cold formability: for nominal size < 16 mm bending radius in transversal direction 3xs in longitudinal direction 4xs (s= nominal thickness) hot forming property: allowed only for stress relieve annealing temperature (max. 580°C) suitability for welding: Steel is weldable according to the common welding methods (EURONORM-INFORMATION Nr. 2 has to be considered)

Related Standards

EN 10137-3

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	7.8 g/cm³ Show Material materials with Densidad of 7.8 g/cm³	Typical for Steel

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Steel
Elongación	20.0 °C	15 % Show Material materials with Elongación of 15 %
Límite elástico	20.0 °C	580 - 620 MPa Show Material materials with Límite elástico of 580 - 620 MPa
Módulo elástico	23.0 °C	190 - 210 GPa Show Material materials with Módulo elástico of 190 - 210 GPa	Typical for Steel
Resistencia a la tracción	20.0 °C	710 - 880 MPa Show Material materials with Resistencia a la tracción of 710 - 880 MPa

Chemical properties

Property	Value
Azufre	0.01 % Show Material materials with Azufre of 0.01 %
Carbono	0.03 - 0.12 % Show Material materials with Carbono of 0.03 - 0.12 %
Fósforo	0.02 % Show Material materials with Fósforo of 0.02 %
Manganeso	0.3 - 1.8 % Show Material materials with Manganeso of 0.3 - 1.8 %
Silicona	0.5 % Show Material materials with Silicona of 0.5 %

Looking for suppliers of this material? Click to see 1 supplier of EN 10137-3 Grade S620AL quenched and tempered (+QT) on Matmatch