EN 10028-6 Grade P355QH quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

High-temperature resistant weldable fine grain structural steel for pressure vessel application in the quenched and tempered condition. Application temperature: -20 to 300 °C

Related Standards

EN 10028-6

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Comment
Densidad	7.8 g/cm³ Show Material materials with Densidad of 7.8 g/cm³	Typical for Steel

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]				Typical for Steel
Elongación		17.4 % Show Material materials with Elongación of 17.4 %				Predicted Value, A200
		17.5 % Show Material materials with Elongación of 17.5 %				Predicted Value, A80
		19.3 % Show Material materials with Elongación of 19.3 %				Predicted Value, A80 Transverse
		20.5 % Show Material materials with Elongación of 20.5 %				Predicted Value, A5
		21.5 % Show Material materials with Elongación of 21.5 %				Predicted Value, Transverse
		24.5 % Show Material materials with Elongación of 24.5 %				Predicted Value, A50
	20 °C	22 % Show Material materials with Elongación of 22 %	quenched and tempered (+QT)	EN 10028-6	Flat
Estricción		43.3 % Show Material materials with Estricción of 43.3 %				Predicted Value, Transverse
		43.4 % Show Material materials with Estricción of 43.4 %				Predicted Value
Límite elástico		257.8 MPa Show Material materials with Límite elástico of 257.8 MPa				Predicted Value, RP1
		322.4 MPa Show Material materials with Límite elástico of 322.4 MPa				Predicted Value, RP1 Transverse
		374 MPa Show Material materials with Límite elástico of 374 MPa				Predicted Value, Transverse
		429.9 MPa Show Material materials with Límite elástico of 429.9 MPa				Predicted Value, RP05
		472.1 MPa Show Material materials with Límite elástico of 472.1 MPa				Predicted Value, RP02 Transverse
		496.6 MPa Show Material materials with Límite elástico of 496.6 MPa				Predicted Value, RP002
	20 °C	315 MPa Show Material materials with Límite elástico of 315 MPa	quenched and tempered (+QT)	EN 10028-6	Flat
	20 °C	335 MPa Show Material materials with Límite elástico of 335 MPa	quenched and tempered (+QT)	EN 10028-6	Flat
	20 °C	355 MPa Show Material materials with Límite elástico of 355 MPa	quenched and tempered (+QT)	EN 10028-6	Flat
	50 °C	280 MPa Show Material materials with Límite elástico of 280 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	50 °C	320 MPa Show Material materials with Límite elástico of 320 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	50 °C	340 MPa Show Material materials with Límite elástico of 340 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	100 °C	250 MPa Show Material materials with Límite elástico of 250 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	100 °C	290 MPa Show Material materials with Límite elástico of 290 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	100 °C	310 MPa Show Material materials with Límite elástico of 310 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	150 °C	225 MPa Show Material materials with Límite elástico of 225 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	150 °C	265 MPa Show Material materials with Límite elástico of 265 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	150 °C	285 MPa Show Material materials with Límite elástico of 285 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	200 °C	200 MPa Show Material materials with Límite elástico of 200 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	200 °C	240 MPa Show Material materials with Límite elástico of 240 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	200 °C	260 MPa Show Material materials with Límite elástico of 260 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	250 °C	175 MPa Show Material materials with Límite elástico of 175 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	250 °C	215 MPa Show Material materials with Límite elástico of 215 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	250 °C	235 MPa Show Material materials with Límite elástico of 235 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	300 °C	155 MPa Show Material materials with Límite elástico of 155 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	300 °C	195 MPa Show Material materials with Límite elástico of 195 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
	300 °C	215 MPa Show Material materials with Límite elástico of 215 MPa	quenched and tempered (+QT)	EN 10028-6	Flat	RP02
Módulo de cizallamiento		80.3 GPa Show Material materials with Módulo de cizallamiento of 80.3 GPa				Predicted Value
Módulo elástico		190 - 210 GPa Show Material materials with Módulo elástico of 190 - 210 GPa				Typical for Steel
Resistencia a la tracción	20 °C	450 - 630 MPa Show Material materials with Resistencia a la tracción of 450 - 630 MPa	quenched and tempered (+QT)	EN 10028-6	Flat
	20 °C	450 - 590 MPa Show Material materials with Resistencia a la tracción of 450 - 590 MPa	quenched and tempered (+QT)	EN 10028-6	Flat
	20 °C	490 - 630 MPa Show Material materials with Resistencia a la tracción of 490 - 630 MPa	quenched and tempered (+QT)	EN 10028-6	Flat
	20 °C	490 - 590 MPa Show Material materials with Resistencia a la tracción of 490 - 590 MPa	quenched and tempered (+QT)	EN 10028-6	Flat
Resistencia al cizallamiento		537.6 MPa Show Material materials with Resistencia al cizallamiento of 537.6 MPa				Predicted Value

Aplicaciones térmicas

Property	Value	Comment
Calor específico	450 J/(kg·K) Show Material materials with Calor específico of 450 J/(kg·K)	Predicted Value
Coeficiente de dilatación térmica	12.02 1/K Show Material materials with Coeficiente de dilatación térmica of 12.02 1/K	Predicted Value
Conductividad térmica	37.22 W/(m·K) Show Material materials with Conductividad térmica of 37.22 W/(m·K)	Predicted Value

Eléctrico

Property	Value	Comment
Conductividad eléctrica	5 S/m Show Material materials with Conductividad eléctrica of 5 S/m	Predicted Value
Resistividad eléctrica	37 Ω·m Show Material materials with Resistividad eléctrica of 37 Ω·m	Predicted Value

Chemical properties

Property	Value	Condition	Related Standards	Shape
Azufre	0.01 % Show Material materials with Azufre of 0.01 %	quenched and tempered (+QT)	EN 10028-6	Flat
	0.015 % Show Material materials with Azufre of 0.015 %	quenched and tempered (+QT)	EN 10028-6	Flat
Boro	0.005 % Show Material materials with Boro of 0.005 %	quenched and tempered (+QT)	EN 10028-6	Flat
Carbono	0.16 % Show Material materials with Carbono of 0.16 %	quenched and tempered (+QT)	EN 10028-6	Flat
Circonio	0.05 % Show Material materials with Circonio of 0.05 %	quenched and tempered (+QT)	EN 10028-6	Flat
Cobre	0.3 % Show Material materials with Cobre of 0.3 %	quenched and tempered (+QT)	EN 10028-6	Flat
Cromo	0.3 % Show Material materials with Cromo of 0.3 %	quenched and tempered (+QT)	EN 10028-6	Flat
Fósforo	0.025 % Show Material materials with Fósforo of 0.025 %	quenched and tempered (+QT)	EN 10028-6	Flat
Manganeso	1.5 % Show Material materials with Manganeso of 1.5 %	quenched and tempered (+QT)	EN 10028-6	Flat
Molibdeno	0.25 % Show Material materials with Molibdeno of 0.25 %	quenched and tempered (+QT)	EN 10028-6	Flat
Niobio	0.05 % Show Material materials with Niobio of 0.05 %	quenched and tempered (+QT)	EN 10028-6	Flat
Nitrógeno	0.015 % Show Material materials with Nitrógeno of 0.015 %	quenched and tempered (+QT)	EN 10028-6	Flat
Níquel	0.5 % Show Material materials with Níquel of 0.5 %	quenched and tempered (+QT)	EN 10028-6	Flat
Silicona	0.4 % Show Material materials with Silicona of 0.4 %	quenched and tempered (+QT)	EN 10028-6	Flat
Titanio	0.03 % Show Material materials with Titanio of 0.03 %	quenched and tempered (+QT)	EN 10028-6	Flat
Vanadio	0.06 % Show Material materials with Vanadio of 0.06 %	quenched and tempered (+QT)	EN 10028-6	Flat

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 3 supplier of EN 10028-6 Grade P355QH quenched and tempered (+QT) on Matmatch