EN 10139 Grade DC04 cold-rolled, strain-hardened (C390)

View suppliers (35)
Want to keep this datasheet? Save it now in your required format

Description

Cold rolled uncoated low carbon steel narrow strip for cold forming.,The non-alloy steel DC04 acc. to DIN EN 10130 is as a deep-draw quality suitable for cold forming of complexest profile forms and components, especially at high deformation speeds (e.g. transfer presses). To freedom of stretcher strains applies a period of 6 months after provision of the products for surface type A and B. Welding: DC04 is weldable by the following welding methods: MAG (metal-active-gas), plasma welding, laser welding, compression weld welding, resistance welding (spot, roll weld, buckle welding), arc welding. The steel acts as substrate for surface refined and coated bands and sheets. Application of DC04: household appliances industry, construction trade. Acc. to DIN EN 10139 DC04 is offered as cold rolled band or bar, cut in strength range HK270 to HK590. On welding of DC04 in condition HK290 to HK590 has to be considered the potential influence to the mechanical properties

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

20.0 °C

7.8 - 7.9 g/cm³

Show Material materials with Densidad of 7.8 - 7.9 g/cm³

Typical for Low Carbon Steel

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

20.0 °C

0.29 [-]

Show Material materials with Coeficiente de Poisson of 0.29 [-]

Typical for Low Carbon Steel

Dureza Vickers

20.0 °C

117 - 155 [-]

Show Material materials with Dureza Vickers of 117 - 155 [-]

Límite elástico

20.0 °C

350 MPa

Show Material materials with Límite elástico of 350 MPa

Módulo elástico

20.0 °C

200 - 215 GPa

Show Material materials with Módulo elástico of 200 - 215 GPa

Typical for Low Carbon Steel

Resistencia a la tracción

20.0 °C

390 - 490 MPa

Show Material materials with Resistencia a la tracción of 390 - 490 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

20.0 °C

1.32E-5 - 1.38E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.32E-5 - 1.38E-5 1/K

Typical for Low Carbon Steel

Temperatura de fusión

1480 - 1526 °C

Show Material materials with Temperatura de fusión of 1480 - 1526 °C

Typical for Low Carbon Steel

Magnético

PropertyValueComment

Temperatura de Curie

770 °C

Show Material materials with Temperatura de Curie of 770 °C

Typical for Low Carbon Steel

Chemical properties

PropertyValue

Azufre

0.03 - 0.035 %

Show Material materials with Azufre of 0.03 - 0.035 %

Carbono

0.08 %

Show Material materials with Carbono of 0.08 %

Fósforo

0.03 - 0.04 %

Show Material materials with Fósforo of 0.03 - 0.04 %

Manganeso

0.4 %

Show Material materials with Manganeso of 0.4 %