EN 10025-2 Grade S235J2 normalized or normalized formed (+N)

Want to keep this datasheet? Save it now in your required format

Description

The hot rolled, unalloyed quality steel S235J2 is a fine grained steel for welding constructions for alternate loading. The steel is not intended for heat treatment. Stress relieving annealing is allowed. Products in the delivery condition +N may be hot formed and/or normalized after delivery. For long products and continuous rolled flats the delivery condition is up to the producer +AR, +N or +M. The delivery condition of four-high rolled sheet is also up to the producer and may be +AR or +N. Both conditions can be ordered. For this steel are available (mat. no 1.0119, S235J2C) grades for folding, roll forming to shape and cold drawing. The steel grade S235J2 (1.0117) replaces the steel grade S235J2G3 (1.0116) according to EN 10025 (1994-03).

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Comment
Densidad	7.8 - 7.9 g/cm³ Show Material materials with Densidad of 7.8 - 7.9 g/cm³	Typical for Low Carbon Steel

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson	20 °C	0.284 [-] Show Material materials with Coeficiente de Poisson of 0.284 [-]	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Dureza Brinell		249 [-] Show Material materials with Dureza Brinell of 249 [-]				Predicted Value, Transverse
Elongación		18.4 % Show Material materials with Elongación of 18.4 %				Predicted Value, A200
		21.4 % Show Material materials with Elongación of 21.4 %				Predicted Value, A5
		26.6 % Show Material materials with Elongación of 26.6 %				Predicted Value, A50
	20 °C	15 % Show Material materials with Elongación of 15 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	16 % Show Material materials with Elongación of 16 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	17 % Show Material materials with Elongación of 17 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	17 % Show Material materials with Elongación of 17 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	18 % Show Material materials with Elongación of 18 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	18 % Show Material materials with Elongación of 18 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	19 % Show Material materials with Elongación of 19 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	19 % Show Material materials with Elongación of 19 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	20 % Show Material materials with Elongación of 20 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	21 % Show Material materials with Elongación of 21 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	21 % Show Material materials with Elongación of 21 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	21 % Show Material materials with Elongación of 21 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	22 % Show Material materials with Elongación of 22 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	22 % Show Material materials with Elongación of 22 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	23 % Show Material materials with Elongación of 23 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	24 % Show Material materials with Elongación of 24 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	24 % Show Material materials with Elongación of 24 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	26 % Show Material materials with Elongación of 26 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Estricción		44.1 % Show Material materials with Estricción of 44.1 %				Predicted Value, Transverse
		50.8 % Show Material materials with Estricción of 50.8 %				Predicted Value
Límite elástico		263.7 MPa Show Material materials with Límite elástico of 263.7 MPa				Predicted Value, RP1
		269.2 MPa Show Material materials with Límite elástico of 269.2 MPa				Predicted Value, RP05
		278.1 MPa Show Material materials with Límite elástico of 278.1 MPa				Predicted Value, Transverse
		320.4 MPa Show Material materials with Límite elástico of 320.4 MPa				Predicted Value, RP1 Transverse
		349.1 MPa Show Material materials with Límite elástico of 349.1 MPa				Predicted Value, RP02
		445.3 MPa Show Material materials with Límite elástico of 445.3 MPa				Predicted Value, RP02 Transverse
		468.1 MPa Show Material materials with Límite elástico of 468.1 MPa				Predicted Value, RP002
	20 °C	165 MPa Show Material materials with Límite elástico of 165 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	175 MPa Show Material materials with Límite elástico of 175 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	185 MPa Show Material materials with Límite elástico of 185 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	195 MPa Show Material materials with Límite elástico of 195 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	215 MPa Show Material materials with Límite elástico of 215 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	225 MPa Show Material materials with Límite elástico of 225 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	235 MPa Show Material materials with Límite elástico of 235 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	100 °C	159 - 187 MPa Show Material materials with Límite elástico of 159 - 187 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	159 - 180 MPa Show Material materials with Límite elástico of 159 - 180 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	159 - 173 MPa Show Material materials with Límite elástico of 159 - 173 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	159 MPa Show Material materials with Límite elástico of 159 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	173 - 187 MPa Show Material materials with Límite elástico of 173 - 187 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	173 - 180 MPa Show Material materials with Límite elástico of 173 - 180 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	173 MPa Show Material materials with Límite elástico of 173 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	180 - 187 MPa Show Material materials with Límite elástico of 180 - 187 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	180 MPa Show Material materials with Límite elástico of 180 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	187 MPa Show Material materials with Límite elástico of 187 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	137 - 161 MPa Show Material materials with Límite elástico of 137 - 161 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	137 - 155 MPa Show Material materials with Límite elástico of 137 - 155 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	137 - 149 MPa Show Material materials with Límite elástico of 137 - 149 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	137 MPa Show Material materials with Límite elástico of 137 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	149 - 161 MPa Show Material materials with Límite elástico of 149 - 161 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	149 - 155 MPa Show Material materials with Límite elástico of 149 - 155 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	149 MPa Show Material materials with Límite elástico of 149 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	155 - 161 MPa Show Material materials with Límite elástico of 155 - 161 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	155 MPa Show Material materials with Límite elástico of 155 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	161 MPa Show Material materials with Límite elástico of 161 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	115 - 143 MPa Show Material materials with Límite elástico of 115 - 143 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	115 - 136 MPa Show Material materials with Límite elástico of 115 - 136 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	115 - 129 MPa Show Material materials with Límite elástico of 115 - 129 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	115 MPa Show Material materials with Límite elástico of 115 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	129 - 143 MPa Show Material materials with Límite elástico of 129 - 143 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	129 - 136 MPa Show Material materials with Límite elástico of 129 - 136 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	129 MPa Show Material materials with Límite elástico of 129 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	136 - 143 MPa Show Material materials with Límite elástico of 136 - 143 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	136 MPa Show Material materials with Límite elástico of 136 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	143 MPa Show Material materials with Límite elástico of 143 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	102 - 122 MPa Show Material materials with Límite elástico of 102 - 122 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	102 - 117 MPa Show Material materials with Límite elástico of 102 - 117 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	102 - 112 MPa Show Material materials with Límite elástico of 102 - 112 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	102 MPa Show Material materials with Límite elástico of 102 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	112 - 122 MPa Show Material materials with Límite elástico of 112 - 122 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	112 - 117 MPa Show Material materials with Límite elástico of 112 - 117 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	112 MPa Show Material materials with Límite elástico of 112 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	117 - 122 MPa Show Material materials with Límite elástico of 117 - 122 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	117 MPa Show Material materials with Límite elástico of 117 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	122 MPa Show Material materials with Límite elástico of 122 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
Módulo de cizallamiento		82 GPa Show Material materials with Módulo de cizallamiento of 82 GPa				Typical for Low Carbon Steel
Módulo elástico		200 - 215 GPa Show Material materials with Módulo elástico of 200 - 215 GPa				Typical for Low Carbon Steel
Resistencia a la tracción	20 °C	330 - 510 MPa Show Material materials with Resistencia a la tracción of 330 - 510 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	330 - 500 MPa Show Material materials with Resistencia a la tracción of 330 - 500 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	330 - 490 MPa Show Material materials with Resistencia a la tracción of 330 - 490 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	330 - 480 MPa Show Material materials with Resistencia a la tracción of 330 - 480 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	340 - 510 MPa Show Material materials with Resistencia a la tracción of 340 - 510 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	340 - 500 MPa Show Material materials with Resistencia a la tracción of 340 - 500 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	340 - 490 MPa Show Material materials with Resistencia a la tracción of 340 - 490 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	340 - 480 MPa Show Material materials with Resistencia a la tracción of 340 - 480 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 510 MPa Show Material materials with Resistencia a la tracción of 350 - 510 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 500 MPa Show Material materials with Resistencia a la tracción of 350 - 500 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 490 MPa Show Material materials with Resistencia a la tracción of 350 - 490 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 480 MPa Show Material materials with Resistencia a la tracción of 350 - 480 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 510 MPa Show Material materials with Resistencia a la tracción of 360 - 510 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 500 MPa Show Material materials with Resistencia a la tracción of 360 - 500 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 490 MPa Show Material materials with Resistencia a la tracción of 360 - 490 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 480 MPa Show Material materials with Resistencia a la tracción of 360 - 480 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Resistencia al cizallamiento		511.9 MPa Show Material materials with Resistencia al cizallamiento of 511.9 MPa				Predicted Value

Aplicaciones térmicas

Property	Value	Comment
Calor específico	465 J/(kg·K) Show Material materials with Calor específico of 465 J/(kg·K)	Typical for Low Carbon Steel
Coeficiente de dilatación térmica	1.32e-05 - 1.38e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 1.32e-05 - 1.38e-05 1/K	Typical for Low Carbon Steel
Conductividad térmica	25 - 93 W/(m·K) Show Material materials with Conductividad térmica of 25 - 93 W/(m·K)	Typical for Low Carbon Steel
Temperatura de fusión	1480 - 1526 °C Show Material materials with Temperatura de fusión of 1480 - 1526 °C	Typical for Low Carbon Steel
Temperatura máx. de funcionamiento	294.5 °C Show Material materials with Temperatura máx. de funcionamiento of 294.5 °C	Predicted Value, Long
	500 °C Show Material materials with Temperatura máx. de funcionamiento of 500 °C	Typical for Carbon Steel

Eléctrico

Property	Value	Comment
Conductividad eléctrica	7 S/m Show Material materials with Conductividad eléctrica of 7 S/m	Predicted Value
Resistividad eléctrica	1.43e-07 - 1.74e-07 Ω·m Show Material materials with Resistividad eléctrica of 1.43e-07 - 1.74e-07 Ω·m	Typical for Carbon Steel

Magnético

Property	Value	Comment
Temperatura de Curie	770 °C Show Material materials with Temperatura de Curie of 770 °C	Typical for Low Carbon Steel

Chemical properties

Property	Value	Condition	Related Standards	Shape
Azufre	0.025 % Show Material materials with Azufre of 0.025 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Carbono	0.17 % Show Material materials with Carbono of 0.17 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Cobre	0.55 % Show Material materials with Cobre of 0.55 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Fósforo	0.025 % Show Material materials with Fósforo of 0.025 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Manganeso	1.4 % Show Material materials with Manganeso of 1.4 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 32 supplier of EN 10025-2 Grade S235J2 normalized or normalized formed (+N) on Matmatch

EN 10025-2 Grade S235J2 normalized or normalized formed (+N)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 29 other suppliers for this grade.

Preview all suppliers

Lectura sugerida

Propiedades