EN 10025-5 Grade S355J2W normalized or normalized formed (+N)

Want to keep this datasheet? Save it now in your required format

Description

The weather resistant steel S355J2W with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding. The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated. Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge. With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible. The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Comment
Densidad	7.8 g/cm³ Show Material materials with Densidad of 7.8 g/cm³	Typical for Steel

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]				Typical for Steel
Dureza Brinell		234 [-] Show Material materials with Dureza Brinell of 234 [-]				Predicted Value, Transverse
Elongación		17.6 % Show Material materials with Elongación of 17.6 %				Predicted Value, A200
		21.8 % Show Material materials with Elongación of 21.8 %				Predicted Value, A5
		23.7 % Show Material materials with Elongación of 23.7 %				Predicted Value, A50
	20 °C	14 % Show Material materials with Elongación of 14 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	15 % Show Material materials with Elongación of 15 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	16 % Show Material materials with Elongación of 16 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	16 % Show Material materials with Elongación of 16 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	17 % Show Material materials with Elongación of 17 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	18 % Show Material materials with Elongación of 18 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	18 % Show Material materials with Elongación of 18 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	18 % Show Material materials with Elongación of 18 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	19 % Show Material materials with Elongación of 19 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	20 % Show Material materials with Elongación of 20 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	20 % Show Material materials with Elongación of 20 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	21 % Show Material materials with Elongación of 21 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	22 % Show Material materials with Elongación of 22 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Estricción		45.3 % Show Material materials with Estricción of 45.3 %				Predicted Value, Transverse
		52.2 % Show Material materials with Estricción of 52.2 %				Predicted Value
Límite elástico		260.9 MPa Show Material materials with Límite elástico of 260.9 MPa				Predicted Value, RP1
		286.6 MPa Show Material materials with Límite elástico of 286.6 MPa				Predicted Value, RP1 Transverse
		388.1 MPa Show Material materials with Límite elástico of 388.1 MPa				Predicted Value, RP02
		393.3 MPa Show Material materials with Límite elástico of 393.3 MPa				Predicted Value, RP05
		407.9 MPa Show Material materials with Límite elástico of 407.9 MPa				Predicted Value, RP02 Transverse
		468.6 MPa Show Material materials with Límite elástico of 468.6 MPa				Predicted Value, RP002
	20 °C	295 MPa Show Material materials with Límite elástico of 295 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	295 MPa Show Material materials with Límite elástico of 295 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	315 MPa Show Material materials with Límite elástico of 315 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	315 MPa Show Material materials with Límite elástico of 315 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	325 MPa Show Material materials with Límite elástico of 325 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	325 MPa Show Material materials with Límite elástico of 325 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	335 MPa Show Material materials with Límite elástico of 335 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	335 MPa Show Material materials with Límite elástico of 335 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	345 MPa Show Material materials with Límite elástico of 345 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	345 MPa Show Material materials with Límite elástico of 345 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	355 MPa Show Material materials with Límite elástico of 355 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	355 MPa Show Material materials with Límite elástico of 355 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Módulo de cizallamiento		80.2 GPa Show Material materials with Módulo de cizallamiento of 80.2 GPa				Predicted Value
Módulo elástico		190 - 210 GPa Show Material materials with Módulo elástico of 190 - 210 GPa				Typical for Steel
Resistencia a la tracción	20 °C	450 - 680 MPa Show Material materials with Resistencia a la tracción of 450 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	450 - 630 MPa Show Material materials with Resistencia a la tracción of 450 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	450 - 600 MPa Show Material materials with Resistencia a la tracción of 450 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	450 - 680 MPa Show Material materials with Resistencia a la tracción of 450 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	450 - 630 MPa Show Material materials with Resistencia a la tracción of 450 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	450 - 600 MPa Show Material materials with Resistencia a la tracción of 450 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	470 - 680 MPa Show Material materials with Resistencia a la tracción of 470 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	470 - 630 MPa Show Material materials with Resistencia a la tracción of 470 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	470 - 600 MPa Show Material materials with Resistencia a la tracción of 470 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	470 - 680 MPa Show Material materials with Resistencia a la tracción of 470 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	470 - 630 MPa Show Material materials with Resistencia a la tracción of 470 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	470 - 600 MPa Show Material materials with Resistencia a la tracción of 470 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 680 MPa Show Material materials with Resistencia a la tracción of 510 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	510 - 630 MPa Show Material materials with Resistencia a la tracción of 510 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	510 - 600 MPa Show Material materials with Resistencia a la tracción of 510 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	510 - 680 MPa Show Material materials with Resistencia a la tracción of 510 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 630 MPa Show Material materials with Resistencia a la tracción of 510 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 600 MPa Show Material materials with Resistencia a la tracción of 510 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Resistencia al cizallamiento		539.7 MPa Show Material materials with Resistencia al cizallamiento of 539.7 MPa				Predicted Value

Aplicaciones térmicas

Property	Value	Comment
Calor específico	455 J/(kg·K) Show Material materials with Calor específico of 455 J/(kg·K)	Predicted Value
Coeficiente de dilatación térmica	12.02 1/K Show Material materials with Coeficiente de dilatación térmica of 12.02 1/K	Predicted Value
Conductividad térmica	36.13 W/(m·K) Show Material materials with Conductividad térmica of 36.13 W/(m·K)	Predicted Value

Eléctrico

Property	Value	Comment
Conductividad eléctrica	3 S/m Show Material materials with Conductividad eléctrica of 3 S/m	Predicted Value
Resistividad eléctrica	35 Ω·m Show Material materials with Resistividad eléctrica of 35 Ω·m	Predicted Value

Chemical properties

Property	Value	Condition	Related Standards	Shape
Azufre	0.03 % Show Material materials with Azufre of 0.03 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Carbono	0.16 % Show Material materials with Carbono of 0.16 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Circonio	0.15 % Show Material materials with Circonio of 0.15 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Cobre	0.25 - 0.55 % Show Material materials with Cobre of 0.25 - 0.55 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Cromo	0.4 - 0.8 % Show Material materials with Cromo of 0.4 - 0.8 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Fósforo	0.03 % Show Material materials with Fósforo of 0.03 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Manganeso	0.5 - 1.5 % Show Material materials with Manganeso of 0.5 - 1.5 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Molibdeno	0.3 % Show Material materials with Molibdeno of 0.3 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Níquel	0.65 % Show Material materials with Níquel of 0.65 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Silicona	0.5 % Show Material materials with Silicona of 0.5 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 11 supplier of EN 10025-5 Grade S355J2W normalized or normalized formed (+N) on Matmatch

EN 10025-5 Grade S355J2W normalized or normalized formed (+N)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 8 other suppliers for this grade.

Preview all suppliers

Lectura sugerida

Propiedades