EN 1652 Grade CuZn30 R410

View suppliers (21)
Want to keep this datasheet? Save it now in your required format

Description

CuZn30 (CW505L) is an unhardenable wrought alloy. High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for CuZn28. Corrosion resistance is similar to pure copper. Processing properties: warm forming: good cold forming: very good machinability: moderately hard and soft soldering: very good TIG-welding: good burnishing: very good CuZn30 is used for deep drawing components, musical instruments, hose tubes, springing elements, clockfaces and as cladding material. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

8.5 - 8.55 g/cm³

Show Material materials with Densidad of 8.5 - 8.55 g/cm³

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

20.0 °C

0.34 [-]

Show Material materials with Coeficiente de Poisson of 0.34 [-]

Elongación

20.0 °C

15 %

Show Material materials with Elongación of 15 %

Elongación A50

20.0 °C

9 - 12 %

Show Material materials with Elongación A50 of 9 - 12 %

Límite elástico Rp 0,2

20.0 °C

260 MPa

Show Material materials with Límite elástico Rp 0,2 of 260 MPa

Módulo de cizallamiento

23.0 °C

40 GPa

Show Material materials with Módulo de cizallamiento of 40 GPa

Typical for Wrought Copper Brass

Módulo elástico

20.0 °C

114 - 115 GPa

Show Material materials with Módulo elástico of 114 - 115 GPa

100.0 °C

112 GPa

Show Material materials with Módulo elástico of 112 GPa

200.0 °C

107 GPa

Show Material materials with Módulo elástico of 107 GPa

300.0 °C

103 GPa

Show Material materials with Módulo elástico of 103 GPa

400.0 °C

96 GPa

Show Material materials with Módulo elástico of 96 GPa

500.0 °C

88 GPa

Show Material materials with Módulo elástico of 88 GPa

600.0 °C

77 GPa

Show Material materials with Módulo elástico of 77 GPa

700.0 °C

67 GPa

Show Material materials with Módulo elástico of 67 GPa

Resistencia a la tracción

20.0 °C

410 - 490 MPa

Show Material materials with Resistencia a la tracción of 410 - 490 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

20.0 °C

377 J/(kg·K)

Show Material materials with Calor específico of 377 J/(kg·K)

100.0 °C

398 J/(kg·K)

Show Material materials with Calor específico of 398 J/(kg·K)

200.0 °C

410 J/(kg·K)

Show Material materials with Calor específico of 410 J/(kg·K)

300.0 °C

419 J/(kg·K)

Show Material materials with Calor específico of 419 J/(kg·K)

400.0 °C

431 J/(kg·K)

Show Material materials with Calor específico of 431 J/(kg·K)

500.0 °C

444 J/(kg·K)

Show Material materials with Calor específico of 444 J/(kg·K)

600.0 °C

452 J/(kg·K)

Show Material materials with Calor específico of 452 J/(kg·K)

700.0 °C

456 J/(kg·K)

Show Material materials with Calor específico of 456 J/(kg·K)

Unlock all property charts

Coeficiente de dilatación térmica

100.0 °C

1.9E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.9E-5 1/K

150.0 °C

1.9E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.9E-5 1/K

300.0 °C

2E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 2E-5 1/K

Unlock all property charts

Conductividad térmica

-200.0 °C

50 W/(m·K)

Show Material materials with Conductividad térmica of 50 W/(m·K)

20.0 °C

121 - 126 W/(m·K)

Show Material materials with Conductividad térmica of 121 - 126 W/(m·K)

200.0 °C

147 W/(m·K)

Show Material materials with Conductividad térmica of 147 W/(m·K)

Unlock all property charts

Temperatura de fusión

875 - 1075 °C

Show Material materials with Temperatura de fusión of 875 - 1075 °C

Typical for Wrought Copper Brass

Eléctrico

PropertyTemperatureValue

Conductividad eléctrica

20.0 °C

1.60E+7 - 1.70E+7 S/m

Show Material materials with Conductividad eléctrica of 1.60E+7 - 1.70E+7 S/m

Resistividad eléctrica

200.0 °C

7.7E-8 Ω·m

Show Material materials with Resistividad eléctrica of 7.7E-8 Ω·m

500.0 °C

1.08E-7 Ω·m

Show Material materials with Resistividad eléctrica of 1.08E-7 Ω·m

Unlock all property charts

Specific Electrical conductivity

28 - 29 % IACS

Show Material materials with Specific Electrical conductivity of 28 - 29 % IACS

Chemical properties

PropertyValue

Aluminio

0.02 %

Show Material materials with Aluminio of 0.02 %

Cobre

69 - 71 %

Show Material materials with Cobre of 69 - 71 %

Estaño

0.1 %

Show Material materials with Estaño of 0.1 %

Hierro

0.05 %

Show Material materials with Hierro of 0.05 %

Níquel

0.3 %

Show Material materials with Níquel of 0.3 %

Plomo

0.05 %

Show Material materials with Plomo of 0.05 %