EN 1652 Grade CuZn33 R500

Want to keep this datasheet? Save it now in your required format

Description

CuZn33 (CW506L) is an unhardenable wrought alloy. High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for CuZn30. Corrosion resistance is similar to pure copper. Processing properties: warm forming: good cold forming: very good machinability: moderately hard and soft soldering: very good TIG-welding: good burnishing: very good CuZn33 is used for deep drawing components, metal goods, watch parts, polishing sheet, wire mesh, cooler strips, tubular rivets and as etching brass. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

Properties of Copper

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8.5 g/cm³ Show Material materials with Densidad of 8.5 g/cm³

Mecánica

Property	Temperature	Value
Coeficiente de Poisson	20.0 °C	0.34 [-] Show Material materials with Coeficiente de Poisson of 0.34 [-]
Límite elástico Rp 0,2	20.0 °C	450 MPa Show Material materials with Límite elástico Rp 0,2 of 450 MPa
Módulo de cizallamiento	20.0 °C	40 GPa Show Material materials with Módulo de cizallamiento of 40 GPa
Módulo elástico	20.0 °C	112 GPa Show Material materials with Módulo elástico of 112 GPa
Resistencia a la tracción	20.0 °C	500 MPa Show Material materials with Resistencia a la tracción of 500 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	377 J/(kg·K) Show Material materials with Calor específico of 377 J/(kg·K)
Coeficiente de dilatación térmica	23.0 °C	1.7E-5 - 2.1E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.7E-5 - 2.1E-5 1/K	Typical for Wrought Copper Brass
Conductividad térmica	20.0 °C	121 W/(m·K) Show Material materials with Conductividad térmica of 121 W/(m·K)
Temperatura de fusión		875 - 1075 °C Show Material materials with Temperatura de fusión of 875 - 1075 °C	Typical for Wrought Copper Brass

Eléctrico

Property	Temperature	Value
Conductividad eléctrica	20.0 °C	1.55E+7 - 1.60E+7 S/m Show Material materials with Conductividad eléctrica of 1.55E+7 - 1.60E+7 S/m
Resistividad eléctrica	20.0 °C	6.5E-8 Ω·m Show Material materials with Resistividad eléctrica of 6.5E-8 Ω·m
Specific Electrical conductivity		28 % IACS Show Material materials with Specific Electrical conductivity of 28 % IACS

Chemical properties

Property	Value
Aluminio	0.02 % Show Material materials with Aluminio of 0.02 %
Cobre	66 - 68.5 % Show Material materials with Cobre of 66 - 68.5 %
Estaño	0.1 % Show Material materials with Estaño of 0.1 %
Fósforo	0.2 % Show Material materials with Fósforo of 0.2 %
Hierro	0.05 % Show Material materials with Hierro of 0.05 %
Níquel	0.3 % Show Material materials with Níquel of 0.3 %
Plomo	0.05 % Show Material materials with Plomo of 0.05 %

Looking for suppliers of this material? Click to see 14 supplier of EN 1652 Grade CuZn33 R500 on Matmatch