EN 12164 Grade CuPb1P R360

View suppliers (4)
Want to keep this datasheet? Save it now in your required format

Description

CuPb1P, mat. No CW113C, is counted among unhardenable, low alloyed copper alloys. To the comparable make CuPb1P, mat. No 2.1160, acc. to DIN 17666 : 1983-12 applies: A strength increase is achievable only by cold forming. The material shows a very high electrical and thermal conductivity as well as very good machinability and cold formability Application: For turning parts for sanitary installations, welding torch nozzles, screws and nuts. Due to the high electrical conductivity for diode plates as well as for electrical connecting and contact elements.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

8.9 g/cm³

Show Material materials with Densidad of 8.9 g/cm³

Mecánica

PropertyTemperatureValue

Dureza Brinell

20.0 °C

120 [-]

Show Material materials with Dureza Brinell of 120 [-]

Elongation A10

20.0 °C

3 %

Show Material materials with Elongation A10 of 3 %

Límite elástico Rp 0,2

20.0 °C

300 - 320 MPa

Show Material materials with Límite elástico Rp 0,2 of 300 - 320 MPa

Módulo elástico

20.0 °C

115 GPa

Show Material materials with Módulo elástico of 115 GPa

Resistencia a la tracción

20.0 °C

360 MPa

Show Material materials with Resistencia a la tracción of 360 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

23.0 °C

360 - 420 J/(kg·K)

Show Material materials with Calor específico of 360 - 420 J/(kg·K)

Typical for Wrought Copper High Copper Alloy

Coeficiente de dilatación térmica

23.0 °C

1.6E-5 - 1.8E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.6E-5 - 1.8E-5 1/K

Typical for Wrought Copper High Copper Alloy

Conductividad térmica

20.0 °C

350 W/(m·K)

Show Material materials with Conductividad térmica of 350 W/(m·K)

Temperatura de fusión

855 - 1090 °C

Show Material materials with Temperatura de fusión of 855 - 1090 °C

Typical for Wrought Copper High Copper Alloy

Eléctrico

PropertyTemperatureValue

Conductividad eléctrica

20.0 °C

5.00E+7 S/m

Show Material materials with Conductividad eléctrica of 5.00E+7 S/m

Specific Electrical conductivity

86 % IACS

Show Material materials with Specific Electrical conductivity of 86 % IACS

Chemical properties

PropertyValue

Fósforo

0 - 0.01 %

Show Material materials with Fósforo of 0 - 0.01 %

Plomo

0.7 - 1.5 %

Show Material materials with Plomo of 0.7 - 1.5 %