EN 12166 Grade CuNi12Zn30Pb1 H130

Want to keep this datasheet? Save it now in your required format

Description

Material CuNi12Zn30Pb1, mat. No. CW406J is an alloy of high strength and hardness. To the comparabel mark CuNi12Zn30Pb1, mat. No. 2.0780, acc. to DIN 17663 : 1983-12 applies: Strength is further increasable due to the high strain hardening capability. The material does not embrittle at low temperatures. Low electrical and thermal conductivity. The alloy is non-magnetic, corrosion resistance is better than for pure copper. Machinability improves by Pb-addition, ductility decreases and cold workabiliy deteriorates. Processing properties: warm forming: unfavorable cold forming: moderately machinability: good hard and soft soldering: very good TIG-welding: moderately burnishing: good Application: Particularly in precision engineering and in toolbuilding for turning and drilling parts, in electrical engineering and electronics as well as in shipbuilding and in construction trade.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8.6 - 8.62 g/cm³ Show Material materials with Densidad of 8.6 - 8.62 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.32 [-] Show Material materials with Coeficiente de Poisson of 0.32 [-]	Typical for Wrought Copper Nickel Silver Grade
Dureza Brinell	20.0 °C	130 - 155 [-] Show Material materials with Dureza Brinell of 130 - 155 [-]
Dureza Vickers	20.0 °C	135 [-] Show Material materials with Dureza Vickers of 135 [-]
Módulo elástico	20.0 °C	120 GPa Show Material materials with Módulo elástico of 120 GPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	377 J/(kg·K) Show Material materials with Calor específico of 377 J/(kg·K)	Typical for Wrought Copper Nickel Silver Grade
Coeficiente de dilatación térmica	300.0 °C	1.95E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.95E-5 1/K
Conductividad térmica	20.0 °C	42 W/(m·K) Show Material materials with Conductividad térmica of 42 W/(m·K)
Temperatura de fusión		875 - 1135 °C Show Material materials with Temperatura de fusión of 875 - 1135 °C	Typical for Wrought Copper Nickel Silver Grade

Eléctrico

Property	Temperature	Value
Conductividad eléctrica	20.0 °C	4.20E+6 S/m Show Material materials with Conductividad eléctrica of 4.20E+6 S/m
Specific Electrical conductivity		7 % IACS Show Material materials with Specific Electrical conductivity of 7 % IACS

Chemical properties

Property	Value
Cobre	56 - 58 % Show Material materials with Cobre of 56 - 58 %
Estaño	0.2 % Show Material materials with Estaño of 0.2 %
Hierro	0.3 % Show Material materials with Hierro of 0.3 %
Manganeso	0.5 % Show Material materials with Manganeso of 0.5 %
Níquel	11 - 13 % Show Material materials with Níquel of 11 - 13 %
Plomo	0.5 - 1.5 % Show Material materials with Plomo of 0.5 - 1.5 %

Looking for suppliers of this material? Click to see 2 supplier of EN 12166 Grade CuNi12Zn30Pb1 H130 on Matmatch