EN 12168 Grade CuZn35Pb2 H100

Want to keep this datasheet? Save it now in your required format

Description

Material CuZn35Pb2, mat. No. CW601N, is an unhardenable wrought alloy. To the comparable make CuZn36Pb1,5, mat. No. 2.0331 acc. to DIN 17660 : 1983-12 applies: High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for the unleaded brass grade of the same Zn-content. Machinability is improved by Pb-addition. Corrosion resistance to water, several saline solutions and organic liquids is also lower than for unleaded alloys of the same zinc-content. Processing properties: warm forming: good cold forming: good machinability: very good hard soldering: moderately soft soldering: very good TIG-welding: unfavorable burnishing: very good Application: Wheels for circuit boards in watch industry, matrices for printing industry, clamps for electrical engineering, nipples, screws.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

Properties of Copper

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8.46 - 8.5 g/cm³ Show Material materials with Densidad of 8.46 - 8.5 g/cm³

Mecánica

Property	Temperature	Value
Dureza Brinell	20.0 °C	100 - 140 [-] Show Material materials with Dureza Brinell of 100 - 140 [-]
Dureza Vickers	20.0 °C	100 - 150 [-] Show Material materials with Dureza Vickers of 100 - 150 [-]
Módulo de cizallamiento	20.0 °C	39 GPa Show Material materials with Módulo de cizallamiento of 39 GPa
Módulo elástico	20.0 °C	105 - 110 GPa Show Material materials with Módulo elástico of 105 - 110 GPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	371 - 418 J/(kg·K) Show Material materials with Calor específico of 371 - 418 J/(kg·K)	Typical for Wrought Copper Brass
Coeficiente de dilatación térmica	200.0 °C	2.04E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 2.04E-5 1/K
Conductividad térmica	20.0 °C	113 - 116 W/(m·K) Show Material materials with Conductividad térmica of 113 - 116 W/(m·K)
Temperatura de fusión		875 - 1075 °C Show Material materials with Temperatura de fusión of 875 - 1075 °C	Typical for Wrought Copper Brass

Eléctrico

Property	Temperature	Value
Conductividad eléctrica	20.0 °C	1.47E+7 S/m Show Material materials with Conductividad eléctrica of 1.47E+7 S/m
Resistividad eléctrica	20.0 °C	6.8E-8 Ω·m Show Material materials with Resistividad eléctrica of 6.8E-8 Ω·m
Specific Electrical conductivity		25 % IACS Show Material materials with Specific Electrical conductivity of 25 % IACS

Chemical properties

Property	Value
Aluminio	0.05 % Show Material materials with Aluminio of 0.05 %
Cobre	62 - 63.5 % Show Material materials with Cobre of 62 - 63.5 %
Estaño	0.1 % Show Material materials with Estaño of 0.1 %
Hierro	0.1 % Show Material materials with Hierro of 0.1 %
Níquel	0.3 % Show Material materials with Níquel of 0.3 %
Plomo	1.6 - 2.5 % Show Material materials with Plomo of 1.6 - 2.5 %

Looking for suppliers of this material? Click to see 6 supplier of EN 12168 Grade CuZn35Pb2 H100 on Matmatch