Propiedades
General
| Property | Temperature | Value |
|---|---|---|
Densidad | 23.0 °C | 7.85 g/cm³ Show Supplier Material materials with Densidad of 7.85 g/cm³ |
Medidas
| Property | Value |
|---|---|
Ancho | 1350 - 2540 mm Show Supplier Material materials with Ancho of 1350 - 2540 mm |
Diámetro exterior | 450 - 910 mm Show Supplier Material materials with Diámetro exterior of 450 - 910 mm |
Diámetro interior | 400 - 730 mm Show Supplier Material materials with Diámetro interior of 400 - 730 mm |
Espesor | 150 - 230 mm Show Supplier Material materials with Espesor of 150 - 230 mm |
Longitud | 1750 - 3370 mm Show Supplier Material materials with Longitud of 1750 - 3370 mm |
Chemical properties
| Property | Value |
|---|---|
Arsénico | 0 - 0.08 % Show Supplier Material materials with Arsénico of 0 - 0.08 % |
Azufre | 0 - 0.04 % Show Supplier Material materials with Azufre of 0 - 0.04 % |
Carbono | 0 - 0.12 % Show Supplier Material materials with Carbono of 0 - 0.12 % |
Cobre | 0 - 0.3 % Show Supplier Material materials with Cobre of 0 - 0.3 % |
Cromo | 0 - 0.3 % Show Supplier Material materials with Cromo of 0 - 0.3 % |
Fósforo | 0 - 0.04 % Show Supplier Material materials with Fósforo of 0 - 0.04 % |
Hierro | Balance |
Manganeso | 1.3 - 1.7 % Show Supplier Material materials with Manganeso of 1.3 - 1.7 % |
Nitrógeno | 0 - 8E-4 % Show Supplier Material materials with Nitrógeno of 0 - 8E-4 % |
Níquel | 0 - 0.3 % Show Supplier Material materials with Níquel of 0 - 0.3 % |
Silicona | 0.5 - 0.8 % Show Supplier Material materials with Silicona of 0.5 - 0.8 % |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Steel ingots are applied for further processing by the methods of plastic deformation, rolling, forging, pressing, etc. | |
| Processing methods | In technological processes of manufacturing are applied sand clays, CO2 process, air-set mold, die-casting. | |