LNP™ COLORCOMP™ Compound DX00511H

Want to keep this datasheet? Save it now in your required format

Description

LNP COLORCOMP DX00511H is is an unfilled polycarbonate (PC). Added features of this grade include good mold release and healthcare.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.15 % Show Supplier Material materials with Absorción de agua of 0.15 %	ASTM D 570 \| (23°C/24hrs)
Densidad	23.0 °C	1.19 g/cm³ Show Supplier Material materials with Densidad of 1.19 g/cm³	ASTM D 792
Densidad relativa	23.0 °C	1.2 [-] Show Supplier Material materials with Densidad relativa of 1.2 [-]	ASTM D 792 \|
Specific volume	23.0 °C	0.83 cm³/g Show Supplier Material materials with Specific volume of 0.83 cm³/g	ASTM D 792

Mecánica

Property	Temperature	Value	Comment
Dureza Rockwell M	23.0 °C	70 [-] Show Supplier Material materials with Dureza Rockwell M of 70 [-]	ASTM D 785 \|
Elongación	23.0 °C	6 % Show Supplier Material materials with Elongación of 6 %	ISO 527 \| yield, 50 mm/min
Hardness, Rockwell R	23.0 °C	118 [-] Show Supplier Material materials with Hardness, Rockwell R of 118 [-]	ASTM D 785
Impact strength, Izod notched, ASTM	23.0 °C	801 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 801 J/m	ASTM D 256 \| notched, 23°C
Impact strength, Izod unnotched, ASTM	23.0 °C	3204 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 3204 J/m	ASTM D 4812 \| 23°C
Instrumented Impact, at Peak	23.0 °C	63 J Show Supplier Material materials with Instrumented Impact, at Peak of 63 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	2.3 GPa Show Supplier Material materials with Módulo de flexión of 2.3 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.4 GPa Show Supplier Material materials with Módulo elástico of 2.4 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	90 MPa Show Supplier Material materials with Resistencia a la flexión of 90 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	63 MPa Show Supplier Material materials with Resistencia a la tracción of 63 MPa	ISO 527 \| yield, 50 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	35 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 35 kJ/m²	ISO 179/2C \| 23°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 12 kJ/m²	ISO 180/1A \| 80104, 23°C
Taber Abrasion	23.0 °C	10 mg/1000cy Show Supplier Material materials with Taber Abrasion of 10 mg/1000cy	ASTM D 1044 \| CS-17, 1 kg
Resistencia al choque, ensayo Charpy no entallado	ISO 179/1eU \| Unnotch Edgew 80104 sp=62mm, -30°C
Resistencia al choque, ensayo Izod no entallado	ISO 180/1U \| 80104, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Ball Pressure Test		nan	IEC 60695-10-2 \| 125°C +/- 2°C
Calor específico	23.0 °C	1.25E-3 J/(kg·K) Show Supplier Material materials with Calor específico of 1.25E-3 J/(kg·K)	ASTM C 351
Coeficiente de dilatación térmica	23.0 °C	7E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 7E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Conductividad térmica	23.0 °C	0.2 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.2 W/(m·K)	ISO 8302
Heat deflection temperature, 0.45 MPa		136 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 136 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		125 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 125 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Temperatura de flexión bajo carga		125 - 136 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 125 - 136 °C
Temperatura de reblandecimiento Vicat		142 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 142 °C	ISO 306 \| Rate B/120

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	2.96 [-] Show Supplier Material materials with Constante dieléctrica, 1 MHz of 2.96 [-]	ASTM D 150
Dielectric constant, 60Hz	23.0 °C	3.17 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 3.17 [-]	ASTM D 150 \| 50/60 Hz
Dissipation factor, 1MHz	23.0 °C	0.01 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 0.01 [-]	ASTM D 150 \|
Dissipation factor, 50Hz	23.0 °C	9E-4 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 9E-4 [-]	ASTM D 150 \| 50/60 Hz
Rigidez dieléctrica	23.0 °C	14.9 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 14.9 kV/mm	ASTM D 149 \| in air, 3.2 mm
Volume resistivity	23.0 °C	1.00E+17 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+17 Ω·cm	>, ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		10.5 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 10.5 g/10min	ASTM D 1238 \| 300°C/1.2 kgf
Velocidad de flujo del volumen derretido		10 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 10 cm³/10min	ISO 1133 \| MVR at 300°C/1.2 kg

Technological properties

Property
Application areas	Medical Device, Pharmaceutical Packaging & Drug Delivery
Availability	Europe,Asia,MEA,Americas,Global
Processing methods	Drying Temperature: 120°C Drying Time: 3 to 4.0hrs Drying Time (Cumulative): 48hrs Maximum Moisture Content: 0.02% Melt Temperature: 295 to 315.0°C Nozzle Temperature: 290 to 310.0°C Front - Zone 3 Temperature: 295 to 315.0°C Middle - Zone 2 Temperature: 280 to 305.0°C Rear - Zone 1 Temperature: 270 to 295.0°C Mold Temperature: 70 to 95.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 40 to 70.0rpm Shot to Cylinder Size: 40 to 60.0% Vent Depth: 0.025 to 0.076mm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.