FLEX NORYL™ Resin WCA105 - Europe

Want to keep this datasheet? Save it now in your required format

Description

FLEX NORYL™ WCA105 resin is a flexible, non-reinforced extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and performance capable of meeting UL VW-1 requirements, 105C end use temperature rating, and heat deformation performance as defined by UL 1581. FLEX NORYL WCA105 resin is intended for evaluation in wire insulation applications in dark colors. It has a Shore D Hardness reading of 56 and exhibits superior thermal stability, very low water absorption, good electric properties, and low specific gravity. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.1 % Show Supplier Material materials with Absorción de agua of 0.1 %	ASTM D 570 \| (23°C/48hrs)
Densidad relativa	23.0 °C	1.03 [-] Show Supplier Material materials with Densidad relativa of 1.03 [-]	ASTM D 792
Índice límite de óxigeno	23.0 °C	25 % Show Supplier Material materials with Índice límite de óxigeno of 25 %

Mecánica

Property	Temperature	Value	Comment
Dureza Shore D	23.0 °C	56 [-] Show Supplier Material materials with Dureza Shore D of 56 [-]	ISO 868
Elongación	23.0 °C	90 % Show Supplier Material materials with Elongación of 90 %	ISO 527 \| break, 50 mm/min
Módulo de flexión	23.0 °C	0.7 GPa Show Supplier Material materials with Módulo de flexión of 0.7 GPa	ISO 178 \| 12.5 mm/min
Resistencia a la tracción	23.0 °C	23 MPa Show Supplier Material materials with Resistencia a la tracción of 23 MPa	ISO 527 \| break, 50 mm/min

Aplicaciones térmicas

Property	Value	Comment
Brittleness temperature	-40 °C Show Supplier Material materials with Brittleness temperature of -40 °C	<, ASTM D 746
Glow Wire Ignition Temperature	750 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 750 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature, 0.45 MPa	85 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 85 °C	ASTM D 648 \| 6.4 mm, unannealed
Temperatura de flexión bajo carga	85 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 85 °C
Temperatura de reblandecimiento Vicat	102 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 102 °C	ISO 306 \| Rate A/50
Inflamabilidad	Smoke Density on 0.5mm plaque, Non-flame, Ds, max: 75- ASTM E 662 <br> Glow Wire Flammability Index 960°C, passes at: 3mm IEC 60695-2-12 <br> Glow Wire Flammability Index 960°C, passes at: 3mm IEC 60695-2-12 <br> Smoke Density on 0.5mm plaque, Flame, Ds, max: 150- ASTM E 662

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	2.5 [-] Show Supplier Material materials with Constante dieléctrica, 1 MHz of 2.5 [-]	IEC 60250
Dielectric constant, 60Hz	23.0 °C	2.6 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.6 [-]	IEC 60250 \| 50/60 Hz
Dissipation factor, 1MHz	23.0 °C	3.8E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 3.8E-3 [-]	IEC 60250
Dissipation factor, 50Hz	23.0 °C	0.02 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 0.02 [-]	IEC 60250 \| 50/60 Hz
Rigidez dieléctrica	23.0 °C	26 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 26 kV/mm	IEC 60243-1 \| in oil, 2.0mm
Volume resistivity	23.0 °C	3.90E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 3.90E+16 Ω·cm	IEC 60093
Índice de seguimiento comparativo	23.0 °C	600 V Show Supplier Material materials with Índice de seguimiento comparativo of 600 V	IEC 60112 \|

Rheological Properties

Property	Value	Comment
Velocidad de flujo de la masa derretida	5.1 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 5.1 g/10min	ASTM D 1238 \| 250°C/10.0 kgf

Technological properties

Property
Application areas	Electronic Components, Data Transfer, Wire & cable
Availability	Americas
Processing methods	Drying Time: 4 to 6.0hrs Drying Time (Cumulative): 12hrs Neck Temperature: 250 to 285.0°C Cross-head Temperature: 250 to 285.0°C Water Bath Temperature: 15 to 80.0°C Middle Zone Temperatures: 230 to 285.0°C Maximum Moisture Content: 0.02% Die Temperature: 250 to 285.0°C Screw Speed: 15 to 40.0rpm Feed Zone Temperature: 210 to 260.0°C Head Zone Temperature: 250 to 285.0°C Cooling Water Air Gap: 100 to 200.0mm Drying Temperature: 60 to 80.0°C Melt Temperature: 250 to 285.0°C Conductor Pre-heat Temperature: 80 to 150.0°C Screen Pack: 150 to 100.0- Extruder Length/Diameter Ratio (L/D): 22:1 to 26:1-
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.