NORYL™ Resin V0150B - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ V0150B resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. exhibits good low temperature impact resistance, damp heat performance, low moisture absorption and good dimensional stability. NORYL V0150B resin is an excellent candidate for parts that are exposed to tough outdoor environments, such as Solar / Photovoltaic (PV) junction boxes and outdoor housings and enclosures.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Electrónica

Pantallas

Construcción

Iluminación

Water Management

Defensa

Bienes de consumo

Electrodomésticos para el hogar

General Appliances

Mostrar todo

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.18 % Show Supplier Material materials with Absorción de agua of 0.18 %	ISO 62-1 \| (23°C/saturated)
Densidad	23.0 °C	1.11 g/cm³ Show Supplier Material materials with Densidad of 1.11 g/cm³	ISO 1183
Densidad relativa	23.0 °C	1.11 [-] Show Supplier Material materials with Densidad relativa of 1.11 [-]	ASTM D 792
Moisture absorption	23.0 °C	0.06 % Show Supplier Material materials with Moisture absorption of 0.06 %	ISO 62 \| (23°C / 50% RH)
Índice límite de óxigeno	23.0 °C	32 % Show Supplier Material materials with Índice límite de óxigeno of 32 %

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	10 % Show Supplier Material materials with Elongación of 10 %	ISO 527 \| break, 50 mm/min
Hardness, Ball Indentation	23.0 °C	113 MPa Show Supplier Material materials with Hardness, Ball Indentation of 113 MPa	ISO 2039-1 \| H358/30
Impact strength, Izod notched, ASTM	23.0 °C	180 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 180 J/m	ASTM D 256 \| notched, -30°C
Instrumented Impact, Total Energy	23.0 °C	50 J Show Supplier Material materials with Instrumented Impact, Total Energy of 50 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	2.4 GPa Show Supplier Material materials with Módulo de flexión of 2.4 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.5 GPa Show Supplier Material materials with Módulo elástico of 2.5 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	110 MPa Show Supplier Material materials with Resistencia a la flexión of 110 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	55 MPa Show Supplier Material materials with Resistencia a la tracción of 55 MPa	ISO 527 \| break, 50 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	14 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 14 kJ/m²	ISO 179/1eA \| V-notch Edgew, 23°C, 80104 sp=62mm
Resistencia al choque, ensayo Izod entallado	23.0 °C	5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 5 kJ/m²	ISO 180/1A \| notched 80104, -30°C
Taber Abrasion	23.0 °C	35 mg/1000cy Show Supplier Material materials with Taber Abrasion of 35 mg/1000cy	SABIC method \| CS-17, 1 kg

Aplicaciones térmicas

Property	Temperature	Value	Comment
Ball pressure temperature		140 °C Show Supplier Material materials with Ball pressure temperature of 140 °C	IEC 60695-10-2 \| approximate maximum
Coeficiente de dilatación térmica	23.0 °C	7E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 7E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Coeficiente de dilatación térmica transversal	23.0 °C	9E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 9E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Conductividad térmica	23.0 °C	0.27 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.27 W/(m·K)	ISO 8302
Glow Wire Flammability Index		960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C
Glow Wire Ignition Temperature		775 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 775 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature, 0.45 MPa		140 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 140 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		130 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 130 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Relative temperature index, electrical		110 °C Show Supplier Material materials with Relative temperature index, electrical of 110 °C	UL 746B
Relative temperature index, mechanical impact		105 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 105 °C	UL 746B
Relative temperature index, mechanical strength		115 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 115 °C	UL 746B
Temperatura de flexión bajo carga		130 - 140 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 130 - 140 °C
Temperatura de reblandecimiento Vicat		155 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 155 °C	ISO 306 \| Rate B/120
Inflamabilidad	Glow Wire Ignitability Temperature, 1.0 mm: 775°C IEC 60695-2-13 <br> UL Recognized, 94V-0 Flame Class Rating: ≥1mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥2mm UL 94 <br> Glow Wire Flammability Index, 1.0 mm: 960°C IEC 60695-2-12 <br> Glow Wire Flammability Index, 1.5 mm: 960°C IEC 60695-2-12 <br> Glow Wire Ignitability Temperature, 1.5 mm: 775°C IEC 60695-2-13 <br> UL Recognized, 94V-1 Flame Class Rating: ≥0.8mm UL 94 <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100727518- - <br> UL Yellow Card Link 2: https://iq.ul.com/ul/cert.aspx?ULID=100727519- -

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	2.7 [-] Show Supplier Material materials with Constante dieléctrica, 1 MHz of 2.7 [-]	IEC 60250
Dielectric constant, 60Hz	23.0 °C	2.8 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.8 [-]	IEC 60250 \| 50/60 Hz
Dissipation factor, 1MHz	23.0 °C	3E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 3E-3 [-]	IEC 60250
Dissipation factor, 50Hz	23.0 °C	9E-4 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 9E-4 [-]	IEC 60250 \| 50/60 Hz
High Amp Arc Ignition	23.0 °C	0.8 mm Show Supplier Material materials with High Amp Arc Ignition of 0.8 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	0.8 mm Show Supplier Material materials with Hot-Wire Ignition of 0.8 mm	≥, UL 746A \| PLC 0
Rigidez dieléctrica	23.0 °C	16 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 16 kV/mm	IEC 60243-1 \| in oil, 3.2 mm,
Sheet resistivity, ROA	23.0 °C	1.00E+15 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+15 Ω	>, IEC 60093
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+15 Ω·cm	IEC 60093 \|
Índice de seguimiento comparativo	23.0 °C	2 V Show Supplier Material materials with Índice de seguimiento comparativo of 2 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		3.5 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 3.5 g/10min	ASTM D 1238 \| 280°C/5.0 kgf
Velocidad de flujo del volumen derretido		10 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 10 cm³/10min	ISO 1133 \| MVR at 300°C/5.0 kg

Technological properties

Property
Application areas	Pump, Photovoltaic Components, Plumbing, Non-LED Lighting, Personal Computing, Infrastructure, Medical Device, LED Lighting, Washing Machine, Wiring Devices, Wireless Communications, Coffee Maker/Espresso Machine, Document Handling, Dishwasher, Circuit Protection, Amusement Machine, Enclosure/Housing/Cover, Electronics, Energy Management, Enclosures, Electronic Components
Availability	Europe,Asia,Americas
Processing methods	Hopper Temperature: 80 to 100.0°C Mold Temperature: 100 to 130.0°C Drying Temperature: 110 to 120.0°C Drying Time: 2 to 3.0hrs Front - Zone 3 Temperature: 300 to 320.0°C Rear - Zone 1 Temperature: 260 to 280.0°C Melt Temperature: 300 to 320.0°C Nozzle Temperature: 280 to 300.0°C Middle - Zone 2 Temperature: 280 to 300.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.