LNP™ LUBRICOMP™ Compound ZX05506

Want to keep this datasheet? Save it now in your required format

Description

LNP LUBRICOMP* ZX05506 is a compound based on PPE+PS Blend resin containing 15% Graphite Powder, 20% PTFE. Added feature of this material is: Wear Resistant.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Coefficient of friction		0.34 [-] Show Supplier Material materials with Coefficient of friction of 0.34 [-]
Coefficient of friction, kinetic		0.34 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.34 [-]	ASTM D 3702 Modified: Manual
Coefficient of friction, static		0.34 [-] Show Supplier Material materials with Coefficient of friction, static of 0.34 [-]	ASTM D 3702 Modified: Manual
Densidad	23.0 °C	1.35 g/cm³ Show Supplier Material materials with Densidad of 1.35 g/cm³	ISO 1183
Moisture absorption	23.0 °C	0.05 % Show Supplier Material materials with Moisture absorption of 0.05 %	ISO 62 \| (23°C / 50% RH)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	2.5 % Show Supplier Material materials with Elongación of 2.5 %	ISO 527 \| break
Impact strength, Izod notched, ASTM	23.0 °C	32 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 32 J/m	ASTM D 256 \| notched, 23°C
Impact strength, Izod unnotched, ASTM	23.0 °C	176 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 176 J/m	ASTM D 4812 \| 23°C
Instrumented Impact, at Peak	23.0 °C	3 J Show Supplier Material materials with Instrumented Impact, at Peak of 3 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	5.4 GPa Show Supplier Material materials with Módulo de flexión of 5.4 GPa	ISO 178
Módulo elástico	23.0 °C	4.9 GPa Show Supplier Material materials with Módulo elástico of 4.9 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	94 MPa Show Supplier Material materials with Resistencia a la flexión of 94 MPa	ISO 178
Resistencia a la tracción	23.0 °C	50 MPa Show Supplier Material materials with Resistencia a la tracción of 50 MPa	ISO 527 \| break
Resistencia al choque, ensayo Izod entallado	23.0 °C	2 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 2 kJ/m²	ISO 180/1A \| 80104, 23°C
Resistencia al choque, ensayo Izod no entallado	23.0 °C	12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 12 kJ/m²	ISO 180/1U \| unnotched 80104

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	126 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 126 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Temperatura de flexión bajo carga	126 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 126 °C

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	ISO 294 \| 24 hrs
Contracción transversal	23.0 °C	0.54 % Show Supplier Material materials with Contracción transversal of 0.54 %	ISO 294 \| 24 hrs

Technological properties

Property
Application areas	Meter Water, EV Infrastructure
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 120°C Drying Time: 4hrs Melt Temperature: 300 to 305.0°C Front - Zone 3 Temperature: 300 to 310.0°C Middle - Zone 2 Temperature: 290 to 300.0°C Rear - Zone 1 Temperature: 275 to 290.0°C Mold Temperature: 80 to 110.0°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.