General
Property | Temperature | Value | Comment |
---|---|---|---|
Absorción de agua | 23.0 °C | 0.02 % Show Supplier Material materials with Absorción de agua of 0.02 % | ISO 62 |
Densidad | 23.0 °C | 1.52 g/cm³ Show Supplier Material materials with Densidad of 1.52 g/cm³ | ISO 1183 |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 1.3 % Show Supplier Material materials with Elongación of 1.3 % | ISO 527 |
Módulo de flexión | 23.0 °C | 11.5 GPa Show Supplier Material materials with Módulo de flexión of 11.5 GPa | ISO 178 |
Resistencia a la flexión | 23.0 °C | 230 MPa Show Supplier Material materials with Resistencia a la flexión of 230 MPa | ISO 178 |
Resistencia a la tracción | 23.0 °C | 165 MPa Show Supplier Material materials with Resistencia a la tracción of 165 MPa | ISO 527 |
Resistencia al choque, ensayo Charpy entallado | 23.0 °C | 20 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 20 kJ/m² | ISO 179 |
Aplicaciones térmicas
Property | Value | Comment |
---|---|---|
Heat deflection temperature, 1.80 MPa | 260 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 260 °C | ISO 75 |
Technological properties
Property | ||
---|---|---|
Application areas | Can be used in vacuum pump impeller,oilfield accessories and other components | |
Fillers | 30% Long Glass Fiber | |
Processing methods | Injection Moulding / Test Specimen Production: Drying: 150°C & 3 hours - Injection Pressure: 30-100 MPa - Injection Molding Melt Temperature: 290-330°C - Injection Molding Mold Temperature: 120-160°C - Limit in-cylinder Retention Time: 300°C/60min or 320°C/30min |