General
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 1.7 % Show Supplier Material materials with Elongación of 1.7 % | ISO 527 |
Módulo de flexión | 23.0 °C | 16 GPa Show Supplier Material materials with Módulo de flexión of 16 GPa | ISO 178 |
Resistencia a la flexión | 23.0 °C | 260 MPa Show Supplier Material materials with Resistencia a la flexión of 260 MPa | ISO 178 |
Resistencia a la tracción | 23.0 °C | 170 MPa Show Supplier Material materials with Resistencia a la tracción of 170 MPa | ISO 527 |
Resistencia al choque, ensayo Charpy entallado | 23.0 °C | 10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m² | ISO 179 |
Aplicaciones térmicas
Eléctrico
Property | Temperature | Value | Comment |
---|---|---|---|
Constante dieléctrica | 23.0 °C | 4.5 [-] Show Supplier Material materials with Constante dieléctrica of 4.5 [-] | IEC 60250 |
Factor de disipación | 23.0 °C | 2E-3 [-] Show Supplier Material materials with Factor de disipación of 2E-3 [-] | IEC 60250 |
Rigidez dieléctrica | 23.0 °C | 16 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 16 kV/mm | IEC 60243 |
Volume resistivity | 23.0 °C | 2.00E+15 Ω·cm Show Supplier Material materials with Volume resistivity of 2.00E+15 Ω·cm | IEC 60093 |
Índice de seguimiento comparativo | 23.0 °C | 155 V Show Supplier Material materials with Índice de seguimiento comparativo of 155 V | IEC 60112 |
Technological properties
Property | ||
---|---|---|
Application areas | Can be used in auto parts such as thermostat housing,water pump cap,regulator,and other industrial fileds. | |
Fillers | 45% Glass Fiber | |
Processing methods | Injection Moulding / Test Specimen Production: Drying: 150°C & 3 hours - Injection Pressure: 30-100 MPa - Injection Molding Melt Temperature: 290-330°C - Injection Molding Mold Temperature: 120-160°C - Limit in-cylinder Retention Time: 300°C/60min or 320°C/30min |