PEEK CF30 SGC301ATF

Nombres alternativos y comerciales
PEEK-SGC301ATF
Want to keep this datasheet? Save it now in your required format

Description

It is a 30% carbon fiber reinforced PEEK compound developed to provide higher strength, wear resistance, low coefficient of friction and chemical resistant.

Los datos sobre este material han sido proporcionados por Sciengy New Materials Co. Ltd.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValueComment

Absorción de agua

23.0 °C

0.04 %

Show Supplier Material materials with Absorción de agua of 0.04 %

ISO 62

Densidad

23.0 °C

1.4 g/cm³

Show Supplier Material materials with Densidad of 1.4 g/cm³

ISO 1183

Mecánica

PropertyTemperatureValueComment

Elongación

23.0 °C

1.5 %

Show Supplier Material materials with Elongación of 1.5 %

ISO 527

Módulo de flexión

23.0 °C

25.5 GPa

Show Supplier Material materials with Módulo de flexión of 25.5 GPa

ISO 178

Resistencia a la flexión

23.0 °C

380 MPa

Show Supplier Material materials with Resistencia a la flexión of 380 MPa

ISO 178

Resistencia a la tracción

23.0 °C

250 MPa

Show Supplier Material materials with Resistencia a la tracción of 250 MPa

ISO 527

Resistencia al choque, ensayo Charpy entallado

23.0 °C

12 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 12 kJ/m²

ISO 179

Aplicaciones térmicas

PropertyTemperatureValueComment

Conductividad térmica

23.0 °C

1 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 1 W/(m·K)

ISO 22007-4

Heat deflection temperature, 1.80 MPa

335 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 335 °C

ISO 75

Temperatura de fusión

343 °C

Show Supplier Material materials with Temperatura de fusión of 343 °C

ISO 11357 (10°C/min)

Inflamabilidad

V-0, UL-94

Eléctrico

PropertyTemperatureValueComment

Volume resistivity

23.0 °C

100000 Ω·cm

Show Supplier Material materials with Volume resistivity of 100000 Ω·cm

IEC 60093

Technological properties

Property
Application areas

Chemical pump pump body and impeller, cable plug, junction box, ultra pure water system pipe fittings and valves.Engine bearing, shim, sealing element, clutch ring.The driving and brake parts of a car. Cable, wire, coil skeleton, connector, etc

Fillers

30% Carbon Fiber

Processing methods

Extrusion or Injection Moulding / Test Specimen Production: Drying 150°C & 3 hours/120°C & 5 hours - Injection molding melt temperature: 375-395°C - Injection molding mold temperature: 180-210°C