DuraSense® 3D Plus 50

Nombres alternativos y comerciales
PP-WF50

Want to keep this datasheet? Save it now in your required format

Description

Polypropylene (PP) reinforced with 50% S-Wood fiber (Biocomposite).

This grade is also available as biobased polypropylene (PP).

Physical properties are measured at 23°C and 50% RH

Related Standards

Los datos sobre este material han sido proporcionados por Stora Enso Biocomposites.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Bio-based content		50.0 % Show Supplier Material materials with Bio-based content of 50.0 %
Densidad	23 °C	1.1 g/cm³ Show Supplier Material materials with Densidad of 1.1 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Elongación	23 °C	7 % Show Supplier Material materials with Elongación of 7 %	ISO 527-2/50
Módulo de flexión	23 °C	2.8 GPa Show Supplier Material materials with Módulo de flexión of 2.8 GPa	ISO 527-2/2
Módulo elástico	23 °C	2.7 GPa Show Supplier Material materials with Módulo elástico of 2.7 GPa	ISO 527-2/2
Resistencia a la tracción	23 °C	45 MPa Show Supplier Material materials with Resistencia a la tracción of 45 MPa	ISO 527-2/50
Resistencia al choque, ensayo Charpy no entallado	23 °C	12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 12 kJ/m²	ISO 179/1eU

Aplicaciones térmicas

Property	Value
Inflamabilidad	UL94: HB

Technological properties

Property
Certifications	Chemical substances: REACH Compliant Raw material: FSC/PEFC™ Chain of Custody Food Applications: EU10/2011, GB4806.6-2016 Production: Approved according to GMP (Good Manufacturing Practice) Toys: EN 71-3, GB 6675.1-2014 ISO certifications: ISO 9001/14001/50001/ OHSAS18001 International Sustainability and Carbon Certification: ICSS Plus
Fillers	50% S-Wood Fiber
Other	General safety instructions, read also Process instructions: Avoid high temperatures an long residence time. At high temperature fibers may degrade and can result in pressure build up in machine. Avoid large piles of purged material, can start to smolder Keep reject material from flammable materials, let cool before disposal i.e in water
Processing methods	Drying: 4 hours at 100°C 3D Extrusion DuraSense® 3D comes in pellet form and is meant to be used in extrusion deposition printing. It is important for optimal surface of the printed material that a significant pressure is built up behind the nozzle. This can be accomplished by setting the layer thickness higher than the actual nozzle diameter. Temperatures: DuraSense® can be melted around 170°C and processed up to 205°C. DuraSense® is sensitive to prolonged exposure to temperatures above 180°C. Avoid unnecessary heating and residence time. Do not set any zones above 205°C. Nozzle: DuraSense® 3D can be used with nozzle diameters equal to or larger than 2mm.

DuraSense® 3D Plus 50

Description

Related Standards

Ashby charts

Usos

Materiales de este proveedor

Propiedades