SY PET-G 3D

Want to keep this datasheet? Save it now in your required format

Description

It is designed for printing in FFF/FDM technology, available in different colors with the following properties:


  • Ease of printing
  • High durability
  • Low susceptibility to shrinkage and flossing
  • Resistance to acids, salts, alkaline substances
  • Odorless
  • Los datos sobre este material han sido proporcionados por Advanced Manufacturing Technologies.

    A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
    Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Propiedades

    General

    PropertyValueComment

    Densidad

    1.29 g/cm³

    Show Supplier Material materials with Densidad of 1.29 g/cm³

    ASTM D792

    Medidas

    PropertyValueComment

    Diámetro

    1.75 mm

    Show Supplier Material materials with Diámetro of 1.75 mm

    Tolerance +/- 0.02 mm

    Mecánica

    PropertyValueComment

    Dureza Shore A

    76.0 [-]

    Show Supplier Material materials with Dureza Shore A of 76.0 [-]

    ASTM D2240

    Elongación

    29 %

    Show Supplier Material materials with Elongación of 29 %

    ISO 527-2

    Límite elástico

    51.0 MPa

    Show Supplier Material materials with Límite elástico of 51.0 MPa

    ISO 527-2

    Módulo de flexión

    2.04 GPa

    Show Supplier Material materials with Módulo de flexión of 2.04 GPa

    ISO 172

    Módulo elástico

    2.98 GPa

    Show Supplier Material materials with Módulo elástico of 2.98 GPa

    ISO 527-2

    Resistencia a la flexión

    68 MPa

    Show Supplier Material materials with Resistencia a la flexión of 68 MPa

    ISO 172

    Resistencia a la tracción

    20 MPa

    Show Supplier Material materials with Resistencia a la tracción of 20 MPa

    ISO 527-2

    Aplicaciones térmicas

    PropertyValuePressureComment

    Temperatura de flexión bajo carga

    68 °C

    Show Supplier Material materials with Temperatura de flexión bajo carga of 68 °C

    0.45 MPa

    ISO 75-2

    Temperatura de reblandecimiento Vicat

    78.0 °C

    Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 78.0 °C

    ISO 3076

    Temperatura de transición del vidrio

    80.0 °C

    Show Supplier Material materials with Temperatura de transición del vidrio of 80.0 °C

    ASTM D3418

    Technological properties

    Property
    Application areas

    END-USE PARTS: containers, holders - PROTOTYPES: bottles, packaging - ELECTRONICS: covers, cases, products containing diodes - DECORATIONS: lamps, glass-resembling elements - JEWELLERY: rings, necklaces, bracelets

    Certifications

    Food Contact approved

    Processing methods

    Print temperature: 230-250°C, Bed temperature: 90°C