Propiedades
General
| Property | Value | Comment |
|---|---|---|
Densidad | 1.1 g/cm³ Show Supplier Material materials with Densidad of 1.1 g/cm³ | ASTM D792 |
Medidas
Mecánica
| Property | Value | Comment |
|---|---|---|
Elongación | 30 % Show Supplier Material materials with Elongación of 30 % | ASTM D638 |
Límite elástico | 37.75 MPa Show Supplier Material materials with Límite elástico of 37.75 MPa | ASTM D638 |
Módulo de flexión | 2.15 GPa Show Supplier Material materials with Módulo de flexión of 2.15 GPa | ASTM D790 |
Resistencia a la flexión | 60.81 MPa Show Supplier Material materials with Resistencia a la flexión of 60.81 MPa | ASTM D790 |
Aplicaciones térmicas
| Property | Value | Pressure | Comment |
|---|---|---|---|
Temperatura de flexión bajo carga | 90 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 90 °C | 1.8 MPa | ASTM D648, unannealed-annealed condition |
100 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 100 °C | 1.8 MPa | ASTM D648, unannealed-annealed condition | |
Temperatura de reblandecimiento Vicat | 107.0 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 107.0 °C | ASTM D1525 |
Technological properties
| Property | ||
|---|---|---|
| Application areas | END-USE PARTS: containers, holders - PROTOTYPES: mechanical parts, architectural models - ELECTRONICS: covers, cases - DECORATIONS: lamps, vases | |
| Processing methods | Bed heating required, printing temperature: 250-270°C, bed temperature: 90-110°C | |