BVOH Copolymer 3D

Want to keep this datasheet? Save it now in your required format

Description

It is designed for printing in FFF/FDM technology . The BVOH filament from Fiberlogy is a butene-diol vinyl alcohol copolymer. It can be used to print perfect prototypes, complex structures and movable mechanisms. It particularly comes in handy where traditional supports could be difficult to remove or would not be sufficient to obtain a satisfactory final print result. With BVOH, printing highly complex 3D objects is extremely easy. Supports created using BVOH filament are very easy to remove. After printing a 3D model, simply place it in warm water and the support filament will dissolve completely. This will result in the actual model being of noticeably better quality than in the case of supports which have to be broken out. mThe BVOH filament can be used with printers with a double extruder. It is characterized by high adhesion to various types of materials. It can be combined with popular materials such as PLA, ABS, PET-G, ASA, Nylon, elastic filaments (e.g. TPU), etc. The filament should be stored in a dry place, e.g. in a sealed bag, in order to avoid wetting of the material and the resulting deterioration of its properties.

Los datos sobre este material han sido proporcionados por Advanced Manufacturing Technologies.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

TIZIRI ADVANCED MANUFACTURING TECHNOLOGIES - TIZIRITECH

DISTRIBUIDOR

Quantity:

1 kg

Additional services:

• Strategic AM consulting,Consulting in engineering, consulting in metallurgy and corrosion. • Metallurgical services • Training portfolio for additive manufactuing technology • Manufacturing for 3D printing services • Metal 3D printing machines supplies ( LMD- WAAM) • Simulation software for additive manufacturing • Project planing • Designs capabilities • Isotropic surface finishing

Usos

Fabricación

Fabricación de aditivos

Fused Filament Fabrication (Fff)

Fused Deposition Modeling (Fdm)

Mecánica de precisión

Joyería

Bienes de consumo

Aplicaciones decorativas

Materiales de este proveedor

Ti-6Al-4V Gr 23 (Size cuts: -150µm/+45µm)

Ti-6Al-4V Gr 23 (Size cuts: -106µm/+45µm)

Ti-6Al-4V Gr 23 (Size cuts: -250µm/+106µm)

Ti-6Al-4V Gr 23-ELI (Size cuts: -45µm/+15µm)

Cp-Ti Gr 1 (Size cuts: -250µm/+106µm)

Ver todos los materiales de este proveedor

Propiedades

Medidas

Property	Value	Comment
Diámetro	1.75 mm Show Supplier Material materials with Diámetro of 1.75 mm	Tolerance +/- 0.02 mm

Mecánica

Property	Value
Elongación	9 % Show Supplier Material materials with Elongación of 9 %
Módulo de flexión	2.9 GPa Show Supplier Material materials with Módulo de flexión of 2.9 GPa
Resistencia a la flexión	71 MPa Show Supplier Material materials with Resistencia a la flexión of 71 MPa
Resistencia a la tracción	45 MPa Show Supplier Material materials with Resistencia a la tracción of 45 MPa

Aplicaciones térmicas

Property	Value
Temperatura de fusión	176.0 °C Show Supplier Material materials with Temperatura de fusión of 176.0 °C
Temperatura de reblandecimiento Vicat	92.0 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 92.0 °C
Temperatura de transición del vidrio	68.0 °C Show Supplier Material materials with Temperatura de transición del vidrio of 68.0 °C

Rheological Properties

Property	Value	Comment
Velocidad de flujo de la masa derretida	7.5 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 7.5 g/10min	230°C/21.1N

Technological properties

Property

Application areas

PROTOTYPES: functional prototypes, small-size models, models with empty spaces - DECORATIONS: complex structures, ornaments with numerous details, vases, jewellery - MECHANISMS: moving elements, mechanisms printed as a whole

Processing methods

Print temperature: 190 – 220°C - Bed temperature: 50 – 100°C (when using plates or other means to increase the adhesion, the heating of the bed is not required) - Protect from moisture (Store filament in tightly sealed containers when not in use).