Propiedades
General
| Property | Value | Comment |
|---|---|---|
Densidad | 1.07 g/cm³ Show Supplier Material materials with Densidad of 1.07 g/cm³ | ISO 483 |
Medidas
| Property | Value | Comment |
|---|---|---|
Diámetro | 1.75 mm Show Supplier Material materials with Diámetro of 1.75 mm | Tolerance +/- 0.02 mm |
Mecánica
| Property | Value | Comment |
|---|---|---|
Módulo elástico | 8 GPa Show Supplier Material materials with Módulo elástico of 8 GPa | ISO 527 |
Resistencia a la tracción | 125 MPa Show Supplier Material materials with Resistencia a la tracción of 125 MPa | ISO 527 |
Resistencia al choque, ensayo Charpy no entallado | 60 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 60 kJ/m² | ISO 179-1 |
90 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 90 kJ/m² | ISO 179-1 |
Aplicaciones térmicas
| Property | Value | Pressure | Comment | ||
|---|---|---|---|---|---|
Temperatura de flexión bajo carga | 170 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 170 °C | 0.45 MPa | ISO 75-1/2 | ||
170 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 170 °C | 1.8 MPa | ISO 75-1/2 | |||
Temperatura de fusión | 178.0 °C Show Supplier Material materials with Temperatura de fusión of 178.0 °C | ISO 3146 | |||
Inflamabilidad | Class HB (UL 94) | ||||
Technological properties
| Property | ||
|---|---|---|
| Application areas | PROTOTYPES: car parts, drones, high durability mechanical components - Substitutes of metal elements - END-USE PRODUCTS: part engineering and tool production based on 3D printing | |
| Fillers | 5% Carbon Fiber | |
| Processing methods | Print temperature: 255 – 270°C, bed temperature: 80-100°C - bed heating required | |