General
Property | Value | Comment |
---|---|---|
Densidad | 1.24 g/cm³ Show Supplier Material materials with Densidad of 1.24 g/cm³ | ASTM D792 |
Medidas
Mecánica
Property | Value | Comment |
---|---|---|
Elongación | 6 % Show Supplier Material materials with Elongación of 6 % | ASTM D882 |
Módulo de flexión | 3.8 GPa Show Supplier Material materials with Módulo de flexión of 3.8 GPa | ASTM D790 |
Módulo elástico | 3.6 GPa Show Supplier Material materials with Módulo elástico of 3.6 GPa | ASTM D882 |
Resistencia a la flexión | 83 MPa Show Supplier Material materials with Resistencia a la flexión of 83 MPa | ASTM D790 |
Resistencia a la tracción | 53 MPa Show Supplier Material materials with Resistencia a la tracción of 53 MPa | ASTM D882 |
Aplicaciones térmicas
Property | Value | Pressure | Comment |
---|---|---|---|
Temperatura de flexión bajo carga | 55 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 55 °C | 0.45 MPa | ASTM E2092 |
Rheological Properties
Property | Value | Comment |
---|---|---|
Velocidad de flujo de la masa derretida | 6 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 6 g/10min | ASTM D1238, 210°C/2.16Kg |
Technological properties
Property | ||
---|---|---|
Application areas | TOYS OR THEIR ELEMENTS: human figures, animals, constructions, houses, vehicles, dice - GADGETS OR THEIR ELEMENTS: key rings, stands, phone cases - PROTOTYPES: new products, concept models - ELEMENTS OF JEWELLERY: earrings, bracelets, beads, necklaces - DECORATIONS: Christmas tree ornaments, pendants | |
Processing methods | Print temperature: 200-230°C, Bed temperature: 50-70°C (when using plates or other means to increase the adhesion, the heating of the bed is not required), Easy PLA Aurora – recommended minimum 0,5 mm nozzle |