Zinkberatung e. V. 1981 Grade G-ZnAl12Cu1 cast condition

Want to keep this datasheet? Save it now in your required format

Description

The material ZnAl12Cu1, a fine zinc block metal alloy acc. to ASTM B 669, german marking ZA 12, is usually the first choice with the transition coming from steel, brass or aluminum. It possesses best casting bar during conventional sand casting assembly. The alloy does not exhibit best workability and has not hard places. It is outstanding pressure tight, even in thin cross sections and is on high polish sharpening and polishingable. The alloy is used mainly for sand and ingot casting, in addition, for pressure casting on cold chamber machines.

Related Standards

Equivalent Materials

DIN ZP12(ZP1110)

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	6.03 g/cm³ Show Material materials with Densidad of 6.03 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Zinc Aluminium
Dureza Brinell	20.0 °C	105 - 125 [-] Show Material materials with Dureza Brinell of 105 - 125 [-]
Elongación A50	20.0 °C	1 - 5 % Show Material materials with Elongación A50 of 1 - 5 %
Límite elástico Rp 0,2	20.0 °C	206 - 220 MPa Show Material materials with Límite elástico Rp 0,2 of 206 - 220 MPa
Módulo elástico	20.0 °C	82.5 GPa Show Material materials with Módulo elástico of 82.5 GPa
Resistencia a la tracción	20.0 °C	275 - 345 MPa Show Material materials with Resistencia a la tracción of 275 - 345 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	393 - 525 J/(kg·K) Show Material materials with Calor específico of 393 - 525 J/(kg·K)	Typical for Zinc Aluminium
Coeficiente de dilatación térmica	23.0 °C	2.2E-5 - 2.8E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 2.2E-5 - 2.8E-5 1/K	Typical for Zinc Aluminium
Conductividad térmica	23.0 °C	105 - 125 W/(m·K) Show Material materials with Conductividad térmica of 105 - 125 W/(m·K)	Typical for Zinc Aluminium
Temperatura de fusión		375 - 485 °C Show Material materials with Temperatura de fusión of 375 - 485 °C	Typical for Zinc Aluminium

Chemical properties

Property	Value
Aluminio	10.5 - 11.5 % Show Material materials with Aluminio of 10.5 - 11.5 %
Cadmio	3E-3 % Show Material materials with Cadmio of 3E-3 %
Cobre	0.5 - 1.25 % Show Material materials with Cobre of 0.5 - 1.25 %
Estaño	2E-3 % Show Material materials with Estaño of 2E-3 %
Hierro	0.08 % Show Material materials with Hierro of 0.08 %
Magnesio	0.02 - 0.03 % Show Material materials with Magnesio of 0.02 - 0.03 %
Plomo	4E-3 % Show Material materials with Plomo of 4E-3 %
Zinc	87.13 % Show Material materials with Zinc of 87.13 %

Technological properties

Property
Processing methods	permanent mould casting