Allgemein
Property | Value | Condition | Related Standards |
---|---|---|---|
Dichte | 2.7 g/cm³ Show Material materials with Dichte of 2.7 g/cm³ | T6151 | EN 573-3, EN 485 |
Mechanisch
Property | Value | Condition | Related Standards | Comment |
---|---|---|---|---|
Biegewinkel 90° | 2.0 °/t Show Material materials with Biegewinkel 90° of 2.0 °/t | T6151 | EN 573-3, EN 485 | |
2.5 °/t Show Material materials with Biegewinkel 90° of 2.5 °/t | T6151 | EN 573-3, EN 485 | ||
4.0 °/t Show Material materials with Biegewinkel 90° of 4.0 °/t | T6151 | EN 573-3, EN 485 | ||
5.0 °/t Show Material materials with Biegewinkel 90° of 5.0 °/t | T6151 | EN 573-3, EN 485 | ||
Elastizitätsmodul | 70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa | T6151 | EN 573-3, EN 485 | |
Härte, Brinell | 81.0 [-] Show Material materials with Härte, Brinell of 81.0 [-] | T6151 | EN 573-3, EN 485 | |
82.0 [-] Show Material materials with Härte, Brinell of 82.0 [-] | T6151 | EN 573-3, EN 485 | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 6000 Series Aluminium | ||
Poissonzahl | 0.33 [-] Show Material materials with Poissonzahl of 0.33 [-] | Typical for Wrought 6000 Series Aluminium | ||
Schubmodule | 26.4 GPa Show Material materials with Schubmodule of 26.4 GPa | T6151 | EN 573-3, EN 485 | |
Zugfestigkeit | 275.0 MPa Show Material materials with Zugfestigkeit of 275.0 MPa | T6151 | EN 573-3, EN 485 | |
280.0 MPa Show Material materials with Zugfestigkeit of 280.0 MPa | T6151 | EN 573-3, EN 485 |
Thermisch
Property | Temperature | Value | Condition | Related Standards |
---|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 20 °C | 2.3399999999999996e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3399999999999996e-05 1/K | T6151 | EN 573-3, EN 485 |
100 °C | 2.3399999999999996e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3399999999999996e-05 1/K | T6151 | EN 573-3, EN 485 | |
Schmelzpunkt | 585.0 - 650.0 °C Show Material materials with Schmelzpunkt of 585.0 - 650.0 °C | T6151 | EN 573-3, EN 485 | |
Spezifische Wärmekapazität | 896.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 896.0 J/(kg·K) | T6151 | EN 573-3, EN 485 | |
Wärmeleitfähigkeit | 170.0 - 220.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 170.0 - 220.0 W/(m·K) | T6151 | EN 573-3, EN 485 |
Elektrisch
Property | Value | Condition | Related Standards |
---|---|---|---|
Elektrische Leitfähigkeit | 24000000.0 - 32000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 24000000.0 - 32000000.0 S/m | T6151 | EN 573-3, EN 485 |
spezifischer Widerstand | 3.13e-08 - 4.17e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.13e-08 - 4.17e-08 Ω·m | T6151 | EN 573-3, EN 485 |
Chemical properties
Property | Value | Condition | Related Standards |
---|---|---|---|
Chrom | 0.25 % Show Material materials with Chrom of 0.25 % | T6151 | EN 573-3, EN 485 |
Eisen | 0.50 % Show Material materials with Eisen of 0.50 % | T6151 | EN 573-3, EN 485 |
Kupfer | 0.1 % Show Material materials with Kupfer of 0.1 % | T6151 | EN 573-3, EN 485 |
Magnesium | 0.6 - 1.2 % Show Material materials with Magnesium of 0.6 - 1.2 % | T6151 | EN 573-3, EN 485 |
Mangan | 0.4 - 1.0 % Show Material materials with Mangan of 0.4 - 1.0 % | T6151 | EN 573-3, EN 485 |
Silizium | 0.7 - 1.3 % Show Material materials with Silizium of 0.7 - 1.3 % | T6151 | EN 573-3, EN 485 |
Titan | 0.1 % Show Material materials with Titan of 0.1 % | T6151 | EN 573-3, EN 485 |
Zink | 0.2 % Show Material materials with Zink of 0.2 % | T6151 | EN 573-3, EN 485 |
Technological properties
Property | ||
---|---|---|
Anodizing | decorative: acceptable, Protective: very good | |
Brazing | hard brazing (with flux/ without flux): good / sufficient, friction soldering: good, soft brazing with flux: acceptable | |
Corrosion properties | Seawater: good, weathering: very good | |
Workability | Bending / Spinning (cold): acceptable (T3, T4) / good (O), Impact extrusion (cold): good (O), Deep drawing / upsetting (Condition) good (O) / good (O) |