Eigenschaften
Allgemein
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Dichte | 2.7 g/cm³ Show Material materials with Dichte of 2.7 g/cm³ | H111 | EN 573-3, EN 754, EN 755 |
Mechanisch
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Elastizitätsmodul | 70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa | H111 | EN 573-3, EN 754, EN 755 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 6000 Series Aluminium | ||
Poissonzahl | 0.33 [-] Show Material materials with Poissonzahl of 0.33 [-] | Typical for Wrought 6000 Series Aluminium | ||
Schubmodule | 26.4 GPa Show Material materials with Schubmodule of 26.4 GPa | H111 | EN 573-3, EN 754, EN 755 | |
Zugfestigkeit | 160.0 Show Material materials with Zugfestigkeit of 160.0 | H111 | EN 573-3, EN 754, EN 755 |
Thermisch
| Property | Temperature | Value | Condition | Related Standards |
|---|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 20 °C | 2.3399999999999996e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3399999999999996e-05 1/K | H111 | EN 573-3, EN 754, EN 755 |
100 °C | 2.3399999999999996e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3399999999999996e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | |
Schmelzpunkt | 585.0 - 650.0 °C Show Material materials with Schmelzpunkt of 585.0 - 650.0 °C | H111 | EN 573-3, EN 754, EN 755 | |
Spezifische Wärmekapazität | 896.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 896.0 J/(kg·K) | H111 | EN 573-3, EN 754, EN 755 | |
Wärmeleitfähigkeit | 170.0 - 220.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 170.0 - 220.0 W/(m·K) | H111 | EN 573-3, EN 754, EN 755 |
Elektrisch
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Elektrische Leitfähigkeit | 24000000.0 - 32000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 24000000.0 - 32000000.0 S/m | H111 | EN 573-3, EN 754, EN 755 |
spezifischer Widerstand | 3.13e-08 - 4.17e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.13e-08 - 4.17e-08 Ω·m | H111 | EN 573-3, EN 754, EN 755 |
Chemical properties
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Chrom | 0.25 % Show Material materials with Chrom of 0.25 % | H111 | EN 573-3, EN 754, EN 755 |
Eisen | 0.50 % Show Material materials with Eisen of 0.50 % | H111 | EN 573-3, EN 754, EN 755 |
Kupfer | 0.1 % Show Material materials with Kupfer of 0.1 % | H111 | EN 573-3, EN 754, EN 755 |
Magnesium | 0.6 - 1.2 % Show Material materials with Magnesium of 0.6 - 1.2 % | H111 | EN 573-3, EN 754, EN 755 |
Mangan | 0.4 - 1.0 % Show Material materials with Mangan of 0.4 - 1.0 % | H111 | EN 573-3, EN 754, EN 755 |
Silizium | 0.7 - 1.3 % Show Material materials with Silizium of 0.7 - 1.3 % | H111 | EN 573-3, EN 754, EN 755 |
Titan | 0.1 % Show Material materials with Titan of 0.1 % | H111 | EN 573-3, EN 754, EN 755 |
Zink | 0.2 % Show Material materials with Zink of 0.2 % | H111 | EN 573-3, EN 754, EN 755 |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: acceptable, Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): good / sufficient, friction soldering: good, soft brazing with flux: acceptable | |
| Corrosion properties | Seawater: good, weathering: very good | |
| Workability | Bending / Spinning (cold): acceptable (T3, T4) / good (O), Impact extrusion (cold): good (O), Deep drawing / upsetting (Condition) good (O) / good (O) | |