Allgemein
Property | Temperature | Value |
---|---|---|
Dichte | 20.0 °C | 8.8 g/cm³ Show Material materials with Dichte of 8.8 g/cm³ |
Abmessung
Property | Value |
---|---|
Dimensions | Dicke |
Mechanisch
Property | Temperature | Value |
---|---|---|
Dehnung | 20.0 °C | 60 % Show Material materials with Dehnung of 60 % |
Dehnung A50 | 20.0 °C | 50 % Show Material materials with Dehnung A50 of 50 % |
Elastizitätsmodul | 20.0 °C | 115 GPa Show Material materials with Elastizitätsmodul of 115 GPa |
Härte, Vickers | 20.0 °C | 90 - 120 [-] Show Material materials with Härte, Vickers of 90 - 120 [-] |
Streckgrenze Rp 0,2 | 20.0 °C | 300 MPa Show Material materials with Streckgrenze Rp 0,2 of 300 MPa |
Zugfestigkeit | 20.0 °C | 370 - 450 MPa Show Material materials with Zugfestigkeit of 370 - 450 MPa |
Thermisch
Property | Temperature | Value |
---|---|---|
Koeffizient der thermischen Ausdehnung | 20.0 °C | 1.85E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.85E-5 1/K |
100.0 °C | 1.85E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.85E-5 1/K | |
Schmelzpunkt | 860 - 1040 °C Show Material materials with Schmelzpunkt of 860 - 1040 °C | |
Wärmeleitfähigkeit | 20.0 °C | 67 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 67 W/(m·K) |
Elektrisch
Property | Temperature | Value |
---|---|---|
Elektrische Leitfähigkeit | 20.0 °C | 7.00E+6 S/m Show Material materials with Elektrische Leitfähigkeit of 7.00E+6 S/m |
spezifischer Widerstand | 20.0 °C | 1.43E-7 Ω·m Show Material materials with spezifischer Widerstand of 1.43E-7 Ω·m |
Chemical properties
Property | Value |
---|---|
Andere | Rest Cu, total 0.2 |
Blei | 0.02 % Show Material materials with Blei of 0.02 % |
Eisen | 0.1 % Show Material materials with Eisen of 0.1 % |
Nickel | 0.2 % Show Material materials with Nickel of 0.2 % |
Phosphor | 0.01 - 0.4 % Show Material materials with Phosphor of 0.01 - 0.4 % |
Zink | 0.2 % Show Material materials with Zink of 0.2 % |
Zinn | 7.5 - 8.5 % Show Material materials with Zinn of 7.5 - 8.5 % |
Technological properties
Property | ||
---|---|---|
Brazing | hard brazing : very good, soft brazing: very good | |
Workability | Cold forming degree between anneals: max. 60 %, general (condition): good |