Kepstan® 6003

Alternative und Handelsbezeichungen
PEKK

Want to keep this datasheet? Save it now in your required format

Description

KEPSTAN® PEKK resin is a high performance thermoplastic material, based on PolyEtherKetoneKetone (PEKK) highly stable chemical backbone. KEPSTAN® PEKK is a unique member of the PAEK family that incorporates distinctive structural features that allow for exceptional possibilities in the control of crystallinity. These features include a low Ether/Ketone ratio and a copolymer structure incorporating Terephtalic and Isophtalic moieties.

The 6000 Series represents the pseudo-amorphous products of the KEPSTAN® family, offering the lowest melting point and the slowest crystallization behavior, while keeping Tg close to 160°C. These properties allow for lower processing temperatures (as low as 320-330°C), and lead to glassy or semi crystalline structures, depending on processing technologies and cooling conditions.

KEPSTAN® 6000 Series includes a medium flow grade, KEPSTAN® 6002, and a high flow grade, KEPSTAN® 6003, both unfilled PEKK resins designed to meet the requirements of a broad range of processing technologies, including among others extrusion, calendering, thermoforming, injection molding, fiber impregnation, rotomolding, powder coating, bonding and welding.

KEPSTAN® PEKK resin is available in pellet form as well as in powder form with different particle sizes. Standard packaging includes 20 kg boxes for pellets and 10 kg boxes for powders.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Dichte	1.27 g/cm³ Show Supplier Material materials with Dichte of 1.27 g/cm³	dry	ISO 1183
Sauerstoffindex	38 % Show Supplier Material materials with Sauerstoffindex of 38 %	dry	ISO 4589-1/-2

Mechanisch

Property	Temperature	Value	Condition	Testing Standard
Elastizitätsmodul		2.9 GPa Show Supplier Material materials with Elastizitätsmodul of 2.9 GPa	dry	ISO 527-1/-2
Schlagfestigkeit, Charpy gekerbt	-30 °C	4.5 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 4.5 kJ/m²	dry	ISO 179/1eA
	23 °C	5 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 5 kJ/m²	dry	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt		No Break at 23 and -30°C	dry	ISO 179/1eU

Thermisch

Property	Value	Condition	Testing Standard	Pressure
Wärmeformbeständigkeitstemperatur	139 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 139 °C	dry	ISO 75-1/-2	2 MPa

Elektrisch

Property	Value	Condition	Frequency	Testing Standard
Dielektrizitätskonstante	2.5 [-] Show Supplier Material materials with Dielektrizitätskonstante of 2.5 [-]	dry	1MHz	IEC 60250

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Schmelzvolumenflussrate	12 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 12 cm³/10min	dry	ISO 1133	380°C/1kg

Technological properties

Property

Application areas

Connectors,Fittings, Components, and Injection Molded Parts,Packaging / Film,Connectors E&E,Performance Wire,Wire and Cables,Natural Gas Distribution- Fittings

Processing methods

Injection Molding:

Drying temperature and time: 120°C for 6 to 8 hours

Processing temperature: 320 – 360°C

Temperature settings - Injection: Rear 300°C / Center 315°C / Front 320°C / Nozzle 330°C

Mold temperature (below Tg in any case): 80 - 120°C

Temperature settings - Extrusion Zones 1/2/3/4: 290°C/ 320°C/ 330°C/ 320°C Die: 320°C

Kepstan® 6003

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften