Kepstan® 8001

Alternative und Handelsbezeichungen
PEKK

Want to keep this datasheet? Save it now in your required format

Description

KEPSTAN® PEKK resin is a high performance thermoplastic material, based on PolyEtherKetoneKetone (PEKK) highly stable chemical backbone. Its semi crystalline structure in solid state offers an outstanding combination of mechanical and thermal strength together with chemical and fire resistance.

The 8000 Series offers the highest glass transition temperature and the highest degree of crystallinity, leading to the best tensile and compression strengths among the wide range of PEKK copolymers within the KEPSTAN® product range.

KEPSTAN® 8000 Series includes a low flow grade, KEPSTAN® 8001, and a medium flow grade, KEPSTAN® 8002, both unfilled pure PEKK resins designed to meet the requirements of a broad range of melt processing technologies, including among others extrusion of stock shapes, tubes, films, extrusion compression, compression molding, injection molding of thick or complex and thin-walled parts.

KEPSTAN® PEKK resin is available in pellet form and in powder form with different particle sizes. Standard packaging includes 20 kg boxes for pellets and 10 kg boxes for powders.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Dichte	1.29 g/cm³ Show Supplier Material materials with Dichte of 1.29 g/cm³	dry	ISO 1183
Sauerstoffindex	35 % Show Supplier Material materials with Sauerstoffindex of 35 %	dry	ISO 4589-1/-2

Mechanisch

Property	Temperature	Value	Condition	Testing Standard	Comment
Elastizitätsmodul		3.8 GPa Show Supplier Material materials with Elastizitätsmodul of 3.8 GPa	dry	ISO 527-1/-2
Schlagfestigkeit, Charpy gekerbt	-30 °C	5 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 5 kJ/m²	dry	ISO 179/1eA
	23 °C	5 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 5 kJ/m²	dry	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt	-30 °C	50 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Charpy ungekerbt of 50 kJ/m²	dry	ISO 179/1eU	No Break at 23°C

Thermisch

Property	Value	Condition	Testing Standard	Pressure
Wärmeformbeständigkeitstemperatur	175 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 175 °C	dry	ISO 75-1/-2	2 MPa

Elektrisch

Property	Value	Condition	Frequency	Testing Standard
Dielektrizitätskonstante	2.6 [-] Show Supplier Material materials with Dielektrizitätskonstante of 2.6 [-]	dry	1MHz	IEC 60250

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Schmelzvolumenflussrate	18 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 18 cm³/10min	dry	ISO 1133	380°C/5kg

Technological properties

Property

Application areas

Metal Tube Coating,Chemical Process Industry,Chemical Process Industry - Injection Molding,Chemical Process Industry - Stock Shapes,Monofilaments,Connectors E&E,Performance Wire,Wire and Cables,Natural Gas Distribution- Fittings,Natural Gas Distribution- Pipes,Offshore Flexible Pipes

Processing methods

Injection Molding:

Drying temperature and time: 150°C for 3 to 4 hours or 120°C for 6 to 8 hours

Processing temperature: 375 – 385°C

Temperature settings - Injection: Rear 350°C / Center 375°C / Front 375°C / Nozzle 385°C

Mold temperature (to facilitate filling of the cavity and polymer crystallization): 220 - 240°C

Temperature settings - Extrusion Zones 1/2/3/4: 340°C/ 360°C/ 380°C/ 380°C Die: 370°C

Kepstan® 8001

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften