Orgasol® 2002 ES4 NAT 3

Alternative und Handelsbezeichungen
PA12

Want to keep this datasheet? Save it now in your required format

Description

ORGASOL® 2002 ES4 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 30µm. ORGASOL® 2002 ES4 NAT 3 has a melting temperature of 177°C. An extremely high level of quality is achieved through rigorous control of the particle size distribution , porosity, ensuring excellent consistency of performance.

ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds.

The introduction of ORGASOL® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density.

ORGASOL® polyamide powders are surface modifiers, specifically designed for gloss control, texture creation and haptic properties adjustment. They also improve blocking resistance and reduce coefficient of friction.

Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes and technical compounds can be significantly improved using ORGASOL® polyamide powders.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Allgemein

Property	Value	Testing Standard	Comment
Coarse particles amount	5 % Show Supplier Material materials with Coarse particles amount of 5 %	ISO 13319	max.
Coarse particles size	60 μm Show Supplier Material materials with Coarse particles size of 60 μm		min.
Dichte	0.425 g/cm³ Show Supplier Material materials with Dichte of 0.425 g/cm³	ISO 1068	apparent density unpacked
Fine particles amount	2 % Show Supplier Material materials with Fine particles amount of 2 %	ISO 13319	max.
Fine particles size	20 μm Show Supplier Material materials with Fine particles size of 20 μm		max.
Median particles size	40 μm Show Supplier Material materials with Median particles size of 40 μm	ISO 13319
Spezifische Oberfläche	1 m²/g Show Supplier Material materials with Spezifische Oberfläche of 1 m²/g	ISO 9277

Thermisch

Property	Value	Condition	Testing Standard
Schmelzpunkt	177 °C Show Supplier Material materials with Schmelzpunkt of 177 °C	dry	ISO 11357-3

Technological properties

Property
Application areas	Coating Additives,Coating Additives - Coil Coating,Coating Additives - Floor Coating

Orgasol® 2002 ES4 NAT 3

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften