Orgasol® 3501 EXD NAT 1

Alternative und Handelsbezeichungen
PA612

Want to keep this datasheet? Save it now in your required format

Description

ORGASOL® 3501 EXD NAT 1 is spheroidal copolyamide 6/12 powder with a narrow particle size distribution and an average diameter of 10µm. ORGASOL® 3501 EXD NAT 1 has a melting temperature of 142°C. An extremely high level of quality is achieved through rigorous control of the particle size distribution, ensuring excellent consistency of performance.

ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds.

The introduction of ORGASOL® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density.

ORGASOL® polyamide powders are surface modifiers, specifically designed for gloss control, texture creation and haptic properties adjustment. They also improve blocking resistance and reduce coefficient of friction.

Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes and technical compounds can be significantly improved using ORGASOL® polyamide powders.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Allgemein

Property	Value	Testing Standard	Comment
Coarse particles amount	5 % Show Supplier Material materials with Coarse particles amount of 5 %	ISO 13319	max.
Coarse particles size	20 μm Show Supplier Material materials with Coarse particles size of 20 μm		min.
Dichte	0.265 g/cm³ Show Supplier Material materials with Dichte of 0.265 g/cm³	ISO 1068	apparent density unpacked
Fine particles amount	10 % Show Supplier Material materials with Fine particles amount of 10 %	ISO 13319	max.
Fine particles size	5 μm Show Supplier Material materials with Fine particles size of 5 μm		max.
Median particles size	10 μm Show Supplier Material materials with Median particles size of 10 μm	ISO 13319
Spezifische Oberfläche	20 m²/g Show Supplier Material materials with Spezifische Oberfläche of 20 m²/g	ISO 9277

Thermisch

Property	Value	Condition	Testing Standard
Schmelzpunkt	142 °C Show Supplier Material materials with Schmelzpunkt of 142 °C	dry	ISO 11357-3

Technological properties

Property
Application areas	Coating Additives - Inkjet Transfer Paper,Coating Additives - Metal Injection Molding

Orgasol® 3501 EXD NAT 1

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften