Pebax® 6333 SA 01 MED

Alternative und Handelsbezeichungen
TPA

Want to keep this datasheet? Save it now in your required format

Description

Polyether block amide Pebax® 6333 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.

Pebax® 6333 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response. Upon request, letters regarding USP Class VI compliance can be provided.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Dichte	1.01 g/cm³ Show Supplier Material materials with Dichte of 1.01 g/cm³	dry	ISO 1183
Moisture absorption	0.7 % Show Supplier Material materials with Moisture absorption of 0.7 %		Sim. to ISO 62
Wasserabsorption	1.1 % Show Supplier Material materials with Wasserabsorption of 1.1 %		Sim. to ISO 62

Mechanisch

Property	Value	Condition	Testing Standard	Comment
Dehnung	50 % Show Supplier Material materials with Dehnung of 50 %	cond., dry	ISO 527-1/-2	min. \| nominal
Elastizitätsmodul	0.285 GPa Show Supplier Material materials with Elastizitätsmodul of 0.285 GPa	cond.	ISO 527-1/-2
	0.307 GPa Show Supplier Material materials with Elastizitätsmodul of 0.307 GPa	dry	ISO 527-1/-2
Elongation at yield	22 % Show Supplier Material materials with Elongation at yield of 22 %	cond., dry	ISO 527-1/-2
Härte, Shore D	58 [-] Show Supplier Material materials with Härte, Shore D of 58 [-]	dry	ISO 7619-1	15 seconds
Schlagzähigkeit, Charpy ungekerbt	No Break at 23 and -30°C	cond.	ISO 179/1eU
Streckgrenze	18 MPa Show Supplier Material materials with Streckgrenze of 18 MPa	cond.	ISO 527-1/-2
	23 MPa Show Supplier Material materials with Streckgrenze of 23 MPa	dry	ISO 527-1/-2

Thermisch

Property	Value	Condition	Testing Standard	Comment
Schmelzpunkt	169 °C Show Supplier Material materials with Schmelzpunkt of 169 °C	dry	ISO 11357-1/-3	10°C/min
Vicat-Erweichungstemperatur	157 °C Show Supplier Material materials with Vicat-Erweichungstemperatur of 157 °C		ISO 306	50°C/h 50N

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Schrumpfung	1.2 % Show Supplier Material materials with Schrumpfung of 1.2 %	dry	ISO 294-4
	1.4 % Show Supplier Material materials with Schrumpfung of 1.4 %	dry	ISO 294-4	Transverse

Technological properties

Property

Application areas

Healthcare-Other,IV Bags,Medical Catheters

Certifications

USP Class VI

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max) : 230°C / 260°C / 290°C.

Typical mold temperature : 25 – 60°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

Extrusion:

Typical melt temperature (Min / Recommended / Max) : 210°C / 225°C / 240°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

Pebax® 6333 SA 01 MED

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften