Pebax® MV 1074 SA 01 MED

Alternative und Handelsbezeichungen
TPA

Want to keep this datasheet? Save it now in your required format

Description

Polyether block amide Pebax® MV 1074 SA 01 MED resin is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide. Hydrophilic Pebax® MV 1074 SA 01 MED resin is suitable for extrusion or coextrusion and offers excellent high moisture absorption properties in wet environments, enhancing lubricity against bodily tissue.

Pebax® MV 1074 SA 01 MED resin is also an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided. Refractive index according to an internal method is 1.502.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Dichte	1.07 g/cm³ Show Supplier Material materials with Dichte of 1.07 g/cm³	dry	ISO 1183
Moisture absorption	1.4 % Show Supplier Material materials with Moisture absorption of 1.4 %		Sim. to ISO 62
Sauerstoffindex	19 % Show Supplier Material materials with Sauerstoffindex of 19 %	dry	ISO 4589-1/-2

Mechanisch

Property	Value	Condition	Testing Standard	Comment
Dehnung	50 % Show Supplier Material materials with Dehnung of 50 %	cond., dry	ISO 527-1/-2	min.
	500 % Show Supplier Material materials with Dehnung of 500 %	dry	ISO 527-3
	700 % Show Supplier Material materials with Dehnung of 700 %	dry	ISO 527-3	Transverse
Elastizitätsmodul	0.08 GPa Show Supplier Material materials with Elastizitätsmodul of 0.08 GPa	cond.	ISO 527-1/-2
	0.097 GPa Show Supplier Material materials with Elastizitätsmodul of 0.097 GPa	dry	ISO 527-1/-2
Härte, Shore D	40 [-] Show Supplier Material materials with Härte, Shore D of 40 [-]	dry	ISO 7619-1	15 seconds
Schlagfestigkeit, Charpy gekerbt	No Break at 23 and -30°C	cond., dry	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt	No Break at 23 and -30°C	dry and cond.	ISO 179/1eU
Zugfestigkeit	32 MPa Show Supplier Material materials with Zugfestigkeit of 32 MPa	dry	ISO 527-3
	34 MPa Show Supplier Material materials with Zugfestigkeit of 34 MPa	dry	ISO 527-3	Transverse

Thermisch

Property	Value	Condition	Testing Standard	Comment
Glasübergangstemperatur	-40 °C Show Supplier Material materials with Glasübergangstemperatur of -40 °C	dry	ISO 11357-1/-2	10°C/min
Schmelzpunkt	158 °C Show Supplier Material materials with Schmelzpunkt of 158 °C	dry	ISO 11357-1/-3	10°C/min

Elektrisch

Property	Value	Condition	Testing Standard
Durchschlagfestigkeit	5 kV/mm Show Supplier Material materials with Durchschlagfestigkeit of 5 kV/mm	dry	IEC 60243-1
Surface resistivity	3e+09 Ω/sq Show Supplier Material materials with Surface resistivity of 3e+09 Ω/sq	cond.	IEC 60093
Volume resistivity	2.5e+07 Ω·cm Show Supplier Material materials with Volume resistivity of 2.5e+07 Ω·cm	cond.	IEC 60093
	1.5e+11 Ω·cm Show Supplier Material materials with Volume resistivity of 1.5e+11 Ω·cm	dry	IEC 60093

Technological properties

Property

Application areas

Permanent Antistatic Solutions,Antistatic/Breathable,Healthcare-Other,IV Bags,Medical Catheters

Certifications

USP Class VI

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max): 200°C / 240°C / 270°C.

Typical mold temperature: 25–60°C.

Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 65-75°C.

Extrusion:

Typical melt temperature (Min / Recommended / Max): 210°C / 220°C / 230°C.

Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 65-75°C.

Pebax® MV 1074 SA 01 MED

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften