Pebax® Rnew® 40R53 SP 01

Alternative und Handelsbezeichungen
TPA

Want to keep this datasheet? Save it now in your required format

Description

Polyether block Pebax® Rnew® 40R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable carbon according to ASTM D6866 is 44-48%.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Bio-based content	44 % Show Supplier Material materials with Bio-based content of 44 %
	48 % Show Supplier Material materials with Bio-based content of 48 %
Dichte	1.03 g/cm³ Show Supplier Material materials with Dichte of 1.03 g/cm³	dry	ISO 1183
Moisture absorption	0.5 % Show Supplier Material materials with Moisture absorption of 0.5 %		Sim. to ISO 62
Wasserabsorption	1.4 % Show Supplier Material materials with Wasserabsorption of 1.4 %		Sim. to ISO 62

Mechanisch

Property	Value	Condition	Testing Standard	Comment
Dehnung	50 % Show Supplier Material materials with Dehnung of 50 %	cond.	ISO 527-1/-2	min.
Elastizitätsmodul	0.075 GPa Show Supplier Material materials with Elastizitätsmodul of 0.075 GPa	cond.	ISO 527-1/-2
Härte, Shore D	39 [-] Show Supplier Material materials with Härte, Shore D of 39 [-]	dry	ISO 7619-1	15 seconds
Schlagfestigkeit, Charpy gekerbt	No Break at 23 and -30°C	cond., dry	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt	No Break at 23 and -30°C	dry and cond.	ISO 179/1eU

Thermisch

Property	Value	Condition	Testing Standard	Comment
Schmelzpunkt	148 °C Show Supplier Material materials with Schmelzpunkt of 148 °C	dry	ISO 11357-1/-3	10°C/min
Vicat-Erweichungstemperatur	121 °C Show Supplier Material materials with Vicat-Erweichungstemperatur of 121 °C		ISO 306	50°C/h 50N

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Schrumpfung	0.6 % Show Supplier Material materials with Schrumpfung of 0.6 %	dry	ISO 294-4
	0.7 % Show Supplier Material materials with Schrumpfung of 0.7 %	dry	ISO 294-4	Transverse

Technological properties

Property

Application areas

Eyewear Frames,Footwear - Outsoles

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C.

Typical mold temperature : 10 – 30°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 60-70°C.

Extrusion:

Typical melt temperature (Min / Recommended / Max): 200°C / 240°C / 270°C.

Drying time and temperature (only necessary for bags opened for more than two hours): 4-8 hours at 60-70°C.

Pebax® Rnew® 40R53 SP 01

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften