Rilsan® BESHV BLK T

Alternative und Handelsbezeichungen
PA11

Want to keep this datasheet? Save it now in your required format

Description

Rilsan® BESHV BLK T

is an ultra high viscosity Polyamide 11 grade specifically designed to be extruded into large diameter thick wall pipe. This grade has been specifically engineered to achieve an outstanding balance of properties for Oil Gas piping applications. It offers a cost effective system for non-metallic corrosion free fluid transfer in critical Oil and Gas industry applications. Rilsan® Polyamide 11 is a thermoplastic material permitted by the US Department of Transportation (DOT) under the Code of Federal Regulations (CFR) Title 49, Part 192, for gas distribution piping to be installed and operated at pressures up to and including 250 psi in a design factor of 0.40. The percentage of renewable carbon according to ASTM D6866 (calculated) is 95%.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Bio-based content	95 % Show Supplier Material materials with Bio-based content of 95 %
Dichte	1.03 g/cm³ Show Supplier Material materials with Dichte of 1.03 g/cm³	dry	ISO 1183

Mechanisch

Property	Temperature	Value	Condition	Testing Standard	Comment
Dehnung		50 % Show Supplier Material materials with Dehnung of 50 %	cond.	ISO 527-1/-2	min.
Elastizitätsmodul		1.4 GPa Show Supplier Material materials with Elastizitätsmodul of 1.4 GPa	cond.	ISO 527-1/-2
Elongation at yield		5 % Show Supplier Material materials with Elongation at yield of 5 %	cond.	ISO 527-1/-2
Schlagfestigkeit, Charpy gekerbt	-30 °C	11 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 11 kJ/m²	cond.	ISO 179/1eA
	23 °C	10 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 10 kJ/m²	cond.	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt		No Break at 23 and -30°C	cond.	ISO 179/1eU
Streckgrenze		25 MPa Show Supplier Material materials with Streckgrenze of 25 MPa	cond.	ISO 527-1/-2
Zugfestigkeit		52 MPa Show Supplier Material materials with Zugfestigkeit of 52 MPa	cond.	ISO 527-1/-2

Thermisch

Property	Value	Condition	Testing Standard	Comment
Schmelzpunkt	189 °C Show Supplier Material materials with Schmelzpunkt of 189 °C	dry	ISO 11357-1/-3	10°C/min

Technological properties

Property

Application areas

Natural Gas Distribution- Fittings,Natural Gas Distribution- Pipes

Processing methods

Injection Molding:

Melt Temperature: (Min / Recommended / Max) 240°C / 270°C / 290°C.

Mold: (Temperature) 20-60°C.

Drying: (Time / Temperature / Desiccant Bed Dryer) 12 hours / 80°C / -40°C. only necessary for bags opened for more than two hours

Rilsan® BESHV BLK T

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften