Rilsan® BESVO A FDA

Alternative und Handelsbezeichungen
PA11

Want to keep this datasheet? Save it now in your required format

Description

PA11,E,22-010

Rilsan® BESVO A FDA resin is a polyamide 11 produced from a renewable source. This natural grade, dedicated to extrusion, contains a negligible amount of oligomers and is specially designed for food contact applications. The percentage of renewable carbon according to ASTM D6866 (calculated) is 100%.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Bio-based content	100 % Show Supplier Material materials with Bio-based content of 100 %
Dichte	1.02 g/cm³ Show Supplier Material materials with Dichte of 1.02 g/cm³	dry	ISO 1183
Wasserabsorption	1.9 % Show Supplier Material materials with Wasserabsorption of 1.9 %		Sim. to ISO 62

Mechanisch

Property	Temperature	Value	Condition	Testing Standard	Comment
Dehnung		50 % Show Supplier Material materials with Dehnung of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elastizitätsmodul		1.2 GPa Show Supplier Material materials with Elastizitätsmodul of 1.2 GPa	cond.	ISO 527-1/-2
Elongation at yield		5 % Show Supplier Material materials with Elongation at yield of 5 %	cond.	ISO 527-1/-2
Härte, Shore D		71 [-] Show Supplier Material materials with Härte, Shore D of 71 [-]	dry	ISO 7619-1	15 seconds
Schlagfestigkeit, Charpy gekerbt	-30 °C	13 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 13 kJ/m²	cond.	ISO 179/1eA
	23 °C	15 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 15 kJ/m²	cond.	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt		No Break at 23 and -30°C	cond.	ISO 179/1eU
Streckgrenze		36 MPa Show Supplier Material materials with Streckgrenze of 36 MPa	cond.	ISO 527-1/-2

Thermisch

Property	Value	Condition	Testing Standard	Comment
Schmelzpunkt	186 °C Show Supplier Material materials with Schmelzpunkt of 186 °C	dry	ISO 11357-1/-3	10°C/min

Elektrisch

Property	Value	Condition	Testing Standard
Durchschlagfestigkeit	30 kV/mm Show Supplier Material materials with Durchschlagfestigkeit of 30 kV/mm	cond.	IEC 60243-1

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Schmelzvolumenflussrate	6 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 6 cm³/10min	dry	ISO 1133	235°C/10kg

Technological properties

Property

Application areas

Chemical Process Industry - Injection Molding,Packaging / Film,Pneumatic Tubing,Tubing and Hoses

Certifications

Food Contact

Processing methods

Injection Molding:

Melt temperature (°C) ISO 294: 260

Mold temperature (°C) ISO 10724: 50

Injection velocity (mm/s) ISO 294: -

Pressure at hold (MPa) ISO 294: 16

Extrusion:

Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 280°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-80°C.

Rilsan® BESVO A FDA

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften