Rilsan® BZM 7 O TL

Alternative und Handelsbezeichungen
PA11-GF8

Want to keep this datasheet? Save it now in your required format

Description

PA11, MHLR, 18-030, GF8

Rilsan® BZM 7 O TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection. The percentage of renewable carbon according to ASTM D6866 (calculated) is 97%.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Bio-based content	97 % Show Supplier Material materials with Bio-based content of 97 %
Dichte	1.07 g/cm³ Show Supplier Material materials with Dichte of 1.07 g/cm³	dry	ISO 1183

Mechanisch

Property	Temperature	Value	Condition	Testing Standard	Comment
Dehnung		50 % Show Supplier Material materials with Dehnung of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elastizitätsmodul		1.8 GPa Show Supplier Material materials with Elastizitätsmodul of 1.8 GPa	cond.	ISO 527-1/-2
Elongation at yield		7 % Show Supplier Material materials with Elongation at yield of 7 %	cond.	ISO 527-1/-2
Härte, Shore D		71 [-] Show Supplier Material materials with Härte, Shore D of 71 [-]	dry	ISO 7619-1	15 seconds
Schlagfestigkeit, Charpy gekerbt	-30 °C	12 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 12 kJ/m²	cond.	ISO 179/1eA
	23 °C	22 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 22 kJ/m²	cond.	ISO 179/1eA

Thermisch

Property	Value	Condition	Testing Standard	Comment
Schmelzpunkt	189 °C Show Supplier Material materials with Schmelzpunkt of 189 °C	dry	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Schmelzvolumenflussrate	20 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 20 cm³/10min	dry	ISO 1133	235°C/5kg
Schrumpfung	0.6 % Show Supplier Material materials with Schrumpfung of 0.6 %	dry	ISO 294-4
	1 % Show Supplier Material materials with Schrumpfung of 1 %	dry	ISO 294-4	Transverse

Technological properties

Property

Application areas

Main applications:

Spring for quick connectors

Outsoles

Packaging: This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf life: Two years from the delivery. For any use above this limit, please refer to our technical services.

Fillers

8% Glass Fiber

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max) : 250°C / 270°C / 290°C.

Mold temperature : 40 - 90°C

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.

Rilsan® BZM 7 O TL

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften