Rilsan® Clear G850 Rnew®

Alternative und Handelsbezeichungen
PA*

Want to keep this datasheet? Save it now in your required format

Description

Rilsan® Clear G850 Rnew® is a high performance transparent copolyamide, partially based on renewable resources. This grade has been specially designed for injection molding applications, ideally suited for optic as high end eyewear frames. Percentage of renewable carbon according to ASTM D6866: 45%

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Bio-based content	45 % Show Supplier Material materials with Bio-based content of 45 %
Dichte	1.01 g/cm³ Show Supplier Material materials with Dichte of 1.01 g/cm³	dry	ISO 1183
Moisture absorption	1.7 % Show Supplier Material materials with Moisture absorption of 1.7 %		Sim. to ISO 62
Wasserabsorption	4 % Show Supplier Material materials with Wasserabsorption of 4 %		Sim. to ISO 62

Mechanisch

Property	Temperature	Value	Condition	Testing Standard	Comment
Dehnung		50 % Show Supplier Material materials with Dehnung of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elastizitätsmodul		1.7 GPa Show Supplier Material materials with Elastizitätsmodul of 1.7 GPa	cond.	ISO 527-1/-2
Elongation at yield		8 % Show Supplier Material materials with Elongation at yield of 8 %	cond.	ISO 527-1/-2
Härte, Shore D		78 [-] Show Supplier Material materials with Härte, Shore D of 78 [-]	dry	ISO 7619-1	15 seconds
Schlagfestigkeit, Charpy gekerbt	-30 °C	7 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 7 kJ/m²	cond.	ISO 179/1eA
	23 °C	7.5 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 7.5 kJ/m²	cond.	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt		No Break at 23 and -30°C	cond.	ISO 179/1eU
Streckgrenze		61 MPa Show Supplier Material materials with Streckgrenze of 61 MPa	cond.	ISO 527-1/-2

Thermisch

Property	Value	Condition	Testing Standard	Comment
Glasübergangstemperatur	150 °C Show Supplier Material materials with Glasübergangstemperatur of 150 °C	dry	ISO 11357-1/-2	10°C/min
Entflammbarkeit	At thickness 1.6 mm IEC 60695-11-10: V-2 and yellow card available

Optisch

Property	Value	Testing Standard
Lichttransmission	92 [-] Show Supplier Material materials with Lichttransmission of 92 [-]	ISO 13468-1/2

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Schrumpfung	0.6 % Show Supplier Material materials with Schrumpfung of 0.6 %	dry	ISO 294-4
	0.8 % Show Supplier Material materials with Schrumpfung of 0.8 %	dry	ISO 294-4	Transverse

Technological properties

Property

Application areas

Eyewear Frames

Certifications

Yellow Card

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommaneded / Max) : 250°C / 280°C / 300°C

Typical mold temperature : 20 - 80 °C

Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C

Rilsan® Clear G850 Rnew®

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften