Rilsan® D40 NATURAL

Alternative und Handelsbezeichungen
PA11
Want to keep this datasheet? Save it now in your required format

Description

RILSAN® D40 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 27-31 µm.

RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes.

The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density.

RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation.

Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Allgemein

PropertyValueTesting StandardComment

Dichte

1.04 g/cm³

Show Supplier Material materials with Dichte of 1.04 g/cm³

ISO 1183

relative density

Median particles size

27 - 31 μm

Show Supplier Material materials with Median particles size of 27 - 31 μm

ISO 13320

Non Tap density

0.37 g/cm³

Show Supplier Material materials with Non Tap density of 0.37 g/cm³

ISO 1068

Wasserabsorption

1.9 %

Show Supplier Material materials with Wasserabsorption of 1.9 %

Sim. to ISO 62

Thermisch

PropertyValueConditionTesting StandardComment

Schmelzpunkt

185 °C

Show Supplier Material materials with Schmelzpunkt of 185 °C

dry

ISO 11357-1/-3

10°C/min

Vicat-Erweichungstemperatur

160 °C

Show Supplier Material materials with Vicat-Erweichungstemperatur of 160 °C

ISO 306

50°C/h 50N

Entflammbarkeit

At thickness 1.6 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: V-2

Elektrisch

PropertyValueConditionTesting Standard

Durchschlagfestigkeit

30 kV/mm

Show Supplier Material materials with Durchschlagfestigkeit of 30 kV/mm

dry

IEC 60243-1

Surface resistivity

1e+14 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq

cond.

IEC 60093

Volume resistivity

1e+14 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+14 Ω·cm

dry

IEC 60093

Technological properties

Property
Application areas

Main applications:

  • Coil coating
  • Wood coating
  • Plastic coating

    Packaging: This grade is delivered in 20kg bag.

    Shelf Life** Five years from the date of delivery. For any use after this limit, please refer to our technical services.